Galaxy G8000S - Stopped working?

My shower is working but leaking internally. Can it be fixed?

Angie
April 2017

my shower stop working their is power going to shower but not lighting up or working can anyone help

des
February 2013

I had the same happen to me & got the problem resolved.
The replacement Solenoid assembly came as a complete moulded unit (pipe assembly from lead-in, etc)...not separate bits as was on my shower, although I have had this a few years now, so maybe the newer G8000S units are slighltly different.
To continue, I also had to disconnect the Main Water supply pipe (Brass Joint),going to the Unit in order to get the Solenoid assembly removed. The small bakelite lead-in pipe was stuck fast to my faulty solenoid, but a bit of wriggling up/down, etc, managed to separate it...be careful..you need this part!
It was just a matter of putting all the parts back together, and thankfully it was a success.

Ricky Baird
February 2009

Hi Craig,
Same fault, and as cmg, bought solenoid from Shower Doctor, similar price, however, I'm going to fit it later today, if any pitfalls I'll post, but I think cmg has covered it ok.
Power Isolated, Isolate water supply,Put plug in shower tray outlet (dropped screws???), and don't forget the 'O' rings.

Tosha

Tosha
January 2009

I've got a similar problem, but the shower isn't even making any sound. Can anyone confirm a new solenoid will fix my problem?

Thanks cmg

cmg
October 2008

I had the exact problem and found a solution you need a solenoid. I purchased mine from The Power and Shower Shop 01827 304888 £17.46 and fitted it myself. I am not a plumber so in laymans terms, turn off water and power. Undo all the screws to the solenoid and those surrounding plus the water feed. This will allow sufficient movement to replace the solenoid and don't forget the washers - most important.

Glyn Jones
August 2007

Did you ever find how to fix it? Mine is having the same problem..

Merry
February 2007