How to mend Machine Start Pulled

Hayter 41 Lawnmower - pull cord not returning?

I pulled the start cord and engine failed to start and then the cord did not recoil as per usual. Engine recen... [Read more]

2

Washing machine?

I've been looking at the problems with the Electrolux EWX14440W, as described in this forum. They talk about t... [Read more]

1

my wasking machine won't work?

I have had no problem with the washing machine and i went to start a load today; pulled the button out to star... [Read more]

2

how can I fix my Toyota model EC21 series RS2000 sewing machine?

I keep threading my Toyoda model EC21 RS2000 Series sewing machine but each time I start to sew the thread com... [Read more]

1

My Fisher & Paykel GWL15-96155B won't pump the water out just back into tub?

Follow up to my previous post: I looked into this again today. The machine will fill the tub with water, the t... [Read more]

Problems with Aqualtis AQGMD149?

Our Hotpoint Aqualtis aqgmd149 has started to have a door lock fault, the lock does not release at the end of ... [Read more]

1

Tricity bendix washing machine?

I set the washing machine to wash, start the process the machine operates fine the the yellow light on the pan... [Read more]

2

Starter rope sticking?

I'd been using my mower and stopped the machine to empty the bag. When trying to re-start, the starter rope co... [Read more]

1

tricity bendix washer dryer pumps water out on drying cycle?

my tricity bendix works perfect on the wash cycle but as soon as i put it onto tumble dry or the automatic dry... [Read more]

TDC32 Tumble Dryer?

Not working, will not operate when I press start button. Clean filter indicator light flickering slightly, but... [Read more]

How can I stop the delay start buttons from flashing ?

I tried to use the delay start feature on my 2 1/2 yr old Zanussi Essential 1600 washing machine. The three li... [Read more]

How do I remove the door seal Samsung Washing Machine Q1433S?

I'm struggling to remove the old door seal. There are 2 plastic pins that I've pulled down. Appears to be circ... [Read more]

1

My Fisher Paykel smart drive 608 6.5kg won't start?

My Fisher Paykel smart drive 608 6.5kg won't start? Basically the lights all turn on as normal, all sounds ... [Read more]

1

quantum power 5 hp lawn mower?

I checked the oil-fine, checked the gas-put some in, pushed the button 3xs, held the handle, pulled the cord a... [Read more]

1

My washing machine (tricity bendix 914780035) won't start ?

The mains indicator comes on when the start knob is pulled out. I can get no short on any of the three door ... [Read more]

Leaking Hotpoint WT540?

Hi there, I have a Hotpoint WT540 that's around 18 months old. It has started to leak. I pulled it out a... [Read more]

2

How can I fix my Brother sewing machine?

I've had this Brother sewing machine for about 15 years using it only occasionally. I can't find a model numb... [Read more]

2

how to fix timer on aeg oko lavamat 508?

When start knob is set to required position and pulled out the water fills to the required amount and machine ... [Read more]

1

How can I fix my Zanussi Nexus FL 1084?

My machine boils after it has pulled hot and cold water when I start a washing cycle. I have disconnected the... [Read more]

2

Fisher Paykel Smartdrive 053 powers uip but won't start?

I pulled apart the front panel to fix the water intake solenoids. When I put the panel back on it did some wei... [Read more]