Recent: Will I need to replace my garden tap?

Mend > Home Alarm Systems

Mend Optima XM Sensor Alarm Tamper

Removing sensor from system Optima XM?

I have had trouble with garage sensor alarming while we are away (probably a spider)
I dont need this sensor anyway and plan to wire the sensor in to a roomin the house with valuable equipment .
I have disconnected the sensor connected into a connector strip . The tamper pair I have twisted together .
The alarm sounds when activated so I have gone through the omit sensor programme but this zone (3) still alarms constantly . Any suggestions untill I rewire to new position?
Paul

Paul Thompson
June 2009
OptimaOptima XMSecurity Systems, Home Alarm SystemsSensor Alarm Tamper
Thanks but I did scan every previous question before sending mine .Have connected it direct into alarm panel and is OK but another zone has alarmed since. Iis there a way to test for faults or shall I just give the sensors a clean ?

Paul
July 2009
Paul, i put my number on here all the time, to help people. I so wish people would read other posts, it would help you so much. Your problem is so easy to resolve, you have twisted the tamper pair together, so why havent you done the same on the alarm pair, or the n/c pair as its known. Do Not twist the 12dc supply pair together whatever you do.
J 07842 480037 I am on this number 7 days a week,

J
June 2009

Automatic Answer

We may have found other answers which could help you.

Click here for Sensor Alarm Tamper

Related Questions ...

Mend unable remove message
2

Unable to remove tamper message?

I have an alarm in my rented property (Yale kit 4-2010 I believe) and stupidly changed the battery on the fron... [Read more]
Mend How to mend it?
3

Can I rewire a motion sensor myself??

I've recently had my living room replastered and had coving put up,so the motion sensor was unscrewed from the... [Read more]
Mend How to mend it?
25

citadel xr2+ tamper mode?

I have a citadel xr2+ and am wanting to put it into tamper mode so that I can fit a new sensor without the ala... [Read more]
Mend alarm system control panel tamper fault
17

9751 alarm with tamper fault?

Folks, I have inheritted an alarm system with the purchase of a new house. It's a Watson Alarm system but i... [Read more]
Mend remove screwed allow
5

Gardtec 300, how to remove sensor for decorating ?

Gardtec 300 Sensors are screwed to wall. I need to open sensor to remove to allow decorating. How can I disabl... [Read more]
Mend alarm fault sensor
15

Scantronic 9000 alarm?

I have old scantronic 9000 series alarm in metal box which has tamper fault following a shock sensor replaceme... [Read more]
Mend alarm tamper reset sensors
11

Re-learn the device?

Scantranic 500R. I believe I have secured the movement dectors inside the sensor so can't understand why the ... [Read more]
Mend flashing changed batteries
3

Scantranic 500r - tamper flashing?

Changed all the batteries in my sensors but one keeps flashing 'tamper' even when I try to re-set the alram it... [Read more]
Mend keypad setting set
6

Keypad dislodged from the housing setting off the tamper alarm?

Hi my keypad became dislodged from the housing, on carefully fitting it back on the tamper sensor was set off.... [Read more]
Mend alarm moved house system
11

Logic 4 Alarm?

I have just moved into a house and it has a Logic 4 Alarm system. I have no instruction manual and don't even ... [Read more]
Mend set walk test
3

alarm will not set - veritas 8c?

Have tried everything in manual under trouble shooting. Alarm will not set have done all e.g the walk test, st... [Read more]
Mend veritas 8 alarm problem
1

veritas 8 alarm problem?

My husband unscrewed a sensor in the bedroom on our veritas 8 alarm so he could decorate behind it,after it wa... [Read more]
Mend security sensor system
1

how can I fix my Veritas R8 alarm system?

I disconnected the alarm system to move a sensor, now I can't reset the system, I have had the power on & off,... [Read more]
Mend three early hours
6

Accenta G3 goes off when un-set?

Our Accenta G3 has gone off three times, always in the early hours of the morning, whilst being un-set. The p... [Read more]
Mend alarm system fault
10

Scantronic 9800 r1 fault?

I recently moved to a house that has a scantronic 9800. We have been using the alarm fine with no problems. I ... [Read more]
Mend sounds exit entry

How do i increase the keyboard sounds and exit entry sounds?
Mend optima 2 alarm

How can I fix my optima 2 alarm?
Mend optima xl6 set

Optima xl6?
Mend unable alarm panel

Unable to set Optima alarm?
Mend security system home

How do I reset optima xm alarm, showing. Attack?
Mend security alarm system

Optima plus 2 small keypad?
Mend optima xm battery

No green light in optima XM burglar alarm?
Mend security alarm system

I have optima optima xm alarm plus panic alarm unit operated by red plastic?
Mend replace battery reset

Optima 2 plus house alarm?
Mend security system alarm panel

Optima XM Alarm panel dead?
Mend house alarm optima

How long does house alarm go for?
Mend security system engineer

optima xm 4 zone?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Optima 2 PlusOptima 8EP396AOptima AccentaOptima CompactOptima G3Optima G4Optima MX6Optima Optima 2 PlusOptima Optima PlusOptima Optima plus 2Optima PlusOptima Plus 2Optima XLOptima XL4Optima XL6OPTIMA XM6

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Optima XM Sensor Issue - False Alarms & Removal