How to mend ... Bearing Seal Bearings

zanussi FL1032?

my zanussi made a rigt bang when washing then there was water on the floor ,i turned the machine off and clean... [Read more]

Dyson CR01 Bearings?

My bearings have gone on my Dyson CR01 washing machine and I've completely dismantled the machine and have rem... [Read more]

coolant is bubbling. knocking sound from engine?

Both these problems began after the the thermostat on my renault megane '04 burst a seal and the engine overhe... [Read more]

indesit w143s bearing seal?

does this seal stop water getting into the bearings or is it a seal to stop water escaping from the drum ? i s... [Read more]

Simpson Encore bearing seized and seal worn?

My Simpson Encore 703 has just blown a fuse because the bearings are too worn. This probably happened because ... [Read more]

replacing bearing on zanussi aquacycle 1250 fls.1383w?

i have located the 2 bearings and seal.what is a spider bolt?

peugeot 306D LX 1999 HATCH, REAR WHEEL BEARING SEALS?

on this car, the integeral brake drum consists of two tapered bearings, with an oil seal on the end of each be... [Read more]

Bearing removal on LG 1480FHD?

Have sourced replacement bearings for LG 1480FHD direct drive washer. Machine is stripped and bearings exposed... [Read more]

Change bearings on Zan Aqua cycle 1400 XC?

removed back and aliwheel bearings shot. ordered bearing kit. does rubber seal and weight come out with drum a... [Read more]

zanussi f1045w?

i have stripped the drum down and removed spider shaft but am still unable to remove old bearings,the front be... [Read more]

zanussi bearings?

Hi, my FLS 1183 W is now making a lot of bearing noise. I have got 2 bearings and a seal and have removed the ... [Read more]

Zannusi WJS1397 Bearing seal?

I replaced the bearings and the drum 12 months ago and they need replacing again. I think the seal may have b... [Read more]

how can i remove the bearings and water seal on a hotpoint wmt03?

i have bought a new bearing kit for my hotpoint wmt03 but am having great difficulty in removing the outer bea... [Read more]

Bearings for Hotpoint WMA32?

Has anyone changed bearings on a Hotpoint WMA32 washing machine. The bearing and seal set is quite cheap and w... [Read more]

what way round does a new bearing seal go in?

What way round does a new bearing seal go in because i am not sure that the one replaced in my hotpoint wm62 a... [Read more]

DOES IT MATTER WHICH WAY ROUND THE BEARING SEAL GOES?

I'M REPLACING THE BEARINGS ON MY ZANUSSI FJ1093 AND HAVE THE KIT. UNFORTUNATELY THE OLD SEAL HAD DISINTEGRATE... [Read more]

change of drum bearings for zanussi turbodry 1050?

Zanussi 1050 seems to have no flange to remove in order to get to the drum bearings ( inside bearing and seal)... [Read more]

noisy bearings hotpoint wm31w washing machine?

info., on how to fit new seal and bearing kit to hotpoint washing machine wm31w

DRUM BEARING?

WERE CAN I BUY A SET OF DRUM BEARINGS WITH SEAL FOR A BOSCH WFF2000 GB/01

how can I get the bearings out?

I'm trying to get the bearings out of the drum on my hotpoint WMA34, but they wont budge at all. The front sea... [Read more]