How to mend Alarm System Control Panel Fault

1

How to fix my Texecom Veritas Home Alarm Power issue?

Hi - I have a Texecom Veritas 8 system. There was a power cut while I was not at home and it has never recove... [Read more]

2

Nexus 8 alarm system - constant bell tamper fault?

My neighbour's home was burgled and the Nexus 8 alarm, which I fitted years ago, activated. Burglars smashed t... [Read more]

1

Scantronic 9454 - tamp/fault/service?

Hi Just moved into a new house and when electrician was installing a new consumer panel, he removed the fuse ... [Read more]

11

Scrantronic alarm gone wrong?

Hi, we had a bF fault on our 9827 scantronic system. The internal alarm was going off every 30 mins. I tried p... [Read more]

17

9751 alarm with tamper fault?

Folks, I have inheritted an alarm system with the purchase of a new house. It's a Watson Alarm system but i... [Read more]

6

alarm goes off after setting and departed from property?

cooper menvier 9448+ alarm system having set the alarm and departed from my house the alarm sounds.On re-enter... [Read more]

4

gardtec 800 alarm system reset?

I have a gardtec 800 series alarm system. This was installed by the previouse house owner. Last night the inte... [Read more]

3

Idiots guide required for wiring Accenta G4 to a Pyronix Delta Bell?

I have managed to wire the complete alarm system, 3 x PIRs, 1 x Door Contact, Control Box and LCD Key pad, all... [Read more]

Optima 2+?

My Alarm started to develop a fault about 6 months ago where it would activate even when it wasn't set? At the... [Read more]

19

9800 bf fault?

Got home from work and an alarm was going off but only inside the house. The control panel was displaying b... [Read more]

5

cooper 9751 alarm system fault?

I have a cooper 9751 with a telecommand 722r remote fob. The battery on the fob failed so the alarm panel gave... [Read more]

Citadel X31-MK11?

I have had a fault on the control panel of my alarm system, i am in the process of replacing it with the above... [Read more]

1

VERITAS 8 ALARM FAULT?

I was moving one of the PIR sensors in the romm when all of a sudden it stopped working, no light or nothing, ... [Read more]

3

How to reset Scantronic 9454 after control panel battery change ?

A friends Scantronic 9454 alarm has had it's control panel battery replaced but now 3 LEDs are flashing (fault... [Read more]

1

Optima XM Kepypad Locked Out?

The problem is as above. The story behind it is as follows: Been doing a lot of renovation / electrical wor... [Read more]

2

Bell box strobe not working?

I have a Securit 800L control panel and I have noticed that the strobe light is not working when the system go... [Read more]

2

Optima plus 2 - Alarm fault?

I have a optima plus2 alarm that goes straight into alarm sounding when the electric power is interupted. I h... [Read more]

1

Scantronic 9448 Faulty following severe HV voltage drop?

My Scantronic 9448 Control Panel (Approx 15 yrs old), no previous problems, developed a fault during a voltage... [Read more]

2

Power cut has placed a fault on my house alarm?

The power at my house went off for 2 hours and now I cannot set the alarm, the alarm is a veritas r8, 12 year... [Read more]

1

How can I fix my Scantronic alarm?

A few weeks back I went away for two days and when I returned I entered the house to find that the alarm did n... [Read more]