How to mend Fault

1

can i replace a 6 volt bell box with a 12 volt bell box?

I have a itec horizon alarm but the bell has a 6 volt battery. I want to replace it with a 12 volt box would ... [Read more]

5

how can i fix my scantronic 9448+?

i have an intermittent fault on the tamper circuit, a local engineer has checked the system but was unable to ... [Read more]

1

how do you get rid of sr on the key pad ?

how do you get rid of S R on the key pad or can i reset the systems there is no fault !!!

14

battery missing fault?

can anyone tell me how to get rid of a missing battery notice? i have a scantronic 816 control panel with a 91... [Read more]

7

scantronic 9800 service and fault light?

I have a scantronic 9800 and the service and fault light is on. I have tried entering the engineer codes which... [Read more]

6

How can I fix a low battery problem?

I have a bF error signal on my 9800 signifying battery fault. How is tthis rectified?

16

scantronic 9800 t6 error code?

I have a Scantronic 9800 alarm and am getting a T6 error code and service and fault lights are both on. I tri... [Read more]

19

9800 bf fault?

Got home from work and an alarm was going off but only inside the house. The control panel was displaying b... [Read more]

3

Scantronic 9800 error message 'cl'?

I have a fault message 'cl' - how do you clear this.

5

scantronic 9800 battery fault?

I have recently replaced my battery when the alarm went off at 1.00am showing the code "bf". I turned the main... [Read more]

14

SCANTRONIC 9800 Microprocessor Intruder Alarm?

The alarm system is going off showing BF [ battery fault ] have checked voltage which is 12, which means Ok! w... [Read more]

2

alarm panel sounding?

the alarm is sounding three times in quick sucession every 30 seconds. Can you tell me what the fault is pleas... [Read more]

4

Where is the battery located?

The LED panel says bF(Battery fault) , where is the battery located to change it?

Scantronic 9651 Remove a sensor completely?

I have 9651 with a 9930 keypad, I want to remove a sensor from the system to install a cabinet and the sensor ... [Read more]

5

tamper fault lockout how can i reset?

tamoer fault lockout how can i reset

5

cooper 9751 alarm system fault?

I have a cooper 9751 with a telecommand 722r remote fob. The battery on the fob failed so the alarm panel gave... [Read more]

4

honeywell g4 ?

just fitted this system used 3 zones only but all 8 zones showing on set up 4-8 fault cant set up have lcd k... [Read more]

3

I have a problem with my Melcom ST6100 alarm control panel?

I have recently installed a melcom ST6100 alram control panel, however whe I attach the alarm box the tamper l... [Read more]

19

9827 Key Pad fault code 6F?

Alarm disabled during the day and went off twice showing 6F as the code, turned alarm off both times with secu... [Read more]

1

my house alarm wont arm because my panic alarm wont work?

my alarm went off 2 nights ago for no reason but a zone was flashing on the alarm itself. today my panic alar... [Read more]