Mend > Sewing Machines

Mend Kenmore 1750 Sewing Machine Zig Zag Stitch

Kenmore Model 1750 suddenly will no longer zig zag stitch?

Can't get my machine to zig zag any more.... The correct disc is in place.... Adjusting the Stitch Width Control Knob makes no difference.... the needle seems stuck to the right end of the presser foot and will only stitch a straight line.... Can't tell if the stitch length is adjusting, either.

Roseann
August 2007

Kenmore Kenmore 1750 Household Appliances, Sewing Machines Sewing Machine Zig Zag Stitch

Hello Roseann,
I don't think my e-mail address came out right.
drivewithken@blueyonder.co.uk
Ken

drivewithken@blueyonder.co.uk
August 2007

Hello Roseann,
You mentioned putting a disc in, put the machine on straight stitch, take the disc out, put the disc back in,I think you may have put the disc in and not made sure the finger is on the outside of the disc, when you have the disc in and you select zig zag, if it does not work, look at the finger that runs round the outside of the disc, it should be on the disc following every contour, if it is not, then a spring has most like come off, try this and get back to me if you have problems, e-mail me below.
Ken

drivewithken@blueyonder,co,uk
August 2007