Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Alarm Systems

Mend Optima XM Going Mains System

Optima, Alarm going off whenever there is a mains failure?

I have an optima XM alarm system that has worked well for several years. Recently if it is set and there is a mains failure, even for a split second, the alarm does off. It can be reset in the normal way and a zone 2 light is indicated. I have done some simple checks ( break mains and see that LED are still lit, and break mains when bell is ringing ) which seem to indicate that both panel and bell batteries are OK. Any ideas what it can be? Are my battery tests valid?

Eric Painter
July 2007
fitt new battry check the set +VE tamper network teminals(11&12(t&a) zone 2 this is used to designated rout between the entry/exit door and control panel. A time inhbit feature on this zone allows a pir to used in a positlion which is patr of the entry route. if you have aquestion phome me on 07716142664 kenny.

kenneth
July 2007
Suspect the backup battery, although the led may remain lit this is no indication of battery condition, you can light a L-E-D with a pencil and a nail pushed into a lemon, but you couldn't run your alarm on it, in other words the battery doesn't have the power required.
If the battery is over 3 years old you should replace it as a matter of course,they dont last for ever and changing the battery would be part of an annual maintenance routine.You should be aware that a faulty battery could lead to irrepairable damage to the main pcb.
They are not too expensive , under a tenner at Screwfix, so treat your system to a new lease of life, and you and your neighbours will have peace and quiet as a result .

Pete.
July 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Going Mains System

Related Questions ...

Mend scantronic reset showing
1

how to fix scantronic 9751 K01 Tamper reset?

hi guys, cant seem to reset my Scantronic 9751 system it keeps showing K01 Tamper reset no matter how many tim... [Read more]
Mend security home system
1

How do I prevent my Optima Plus alarm system going off!?

Twice in the past week my Optima Plus Home Alarm system has gone off in the middle of the night & I have been ... [Read more]
Mend security battery system
2

How can I stop the mains power light from flashing?

Have replaced the battery for scant ronin 9448+ alarm system. The mains power light keeps flashing, it should ... [Read more]
Mend alarm wrong going
11

Scrantronic alarm gone wrong?

Hi, we had a bF fault on our 9827 scantronic system. The internal alarm was going off every 30 mins. I tried p... [Read more]
Mend hello hope kind help
14

Tunstall 2500 ?

Hello all, hope some kind soul can help? I have major problem with it before and following a battery replac... [Read more]
Mend security system home
2

Optima XM house alarm?

Went to bed last night, did not set alarm but noticed both mains & day mode lights were lit as normal. Went to... [Read more]
Mend alarm system security system battery fault
4

gardtec 800 alarm system reset?

I have a gardtec 800 series alarm system. This was installed by the previouse house owner. Last night the inte... [Read more]
Mend alarm system attack
3

home alarm systems?

we have an old alarm system optima xl. the problem we have is we woke up this morning alarm going off led ligh... [Read more]
Mend light key pad
1

green main light flashs?

i have a melcom alarm system st6500 and my key pad keeps going out i have replace the battery but after a few ... [Read more]
Mend system replacing battery
1

Accenta 6 system - replacing battery?

I thought I would replace battery as read that it was cause of keypad being dead. So I isolated the mains sup... [Read more]
Mend security system house
1

Accenta 8 - House Move, help!?

I've just moved into my new home. The previous occupants switched off the mains power when they left (a couple... [Read more]
Mend alarm help installed
4

Accenta 6 Alarm System Unresponsive Keypad - Please Help!?

Hi I wonder if anyone could help. We have moved into a house that has an Accenta alarm system installed. T... [Read more]
Mend security system keypad
1

ACCENTA 5 ALARM SYSTEM?

I HAVE JUST RETURNED FROM HOLIDAY MY ALARM SYSTEM IS NOT WORKING ALTHOUGH I ENTERED PIN AND IT WAS WORKING P... [Read more]
Mend working fine removed
1

How can I set an exit time?

The system is an Optima Plus Working fine until I removed the mains fuse, then unable to set an exit time. W... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems