Recent: Lg vcr?

Mend > Document Laminators

Mend GBC Ultima 65 Heat

My GBC Heat Seal Ultima 65 laminator is stopping in the middle of running?

My laminator stops running in the middle of laminating. If you turn the machine off and back on again it will work for a little bit then stop. Help

Eva
February 2012
GBCGBC Ultima 65Office Appliances, Document LaminatorsHeat Ultima 65

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Heat Ultima 65

Related Questions ...

Mend gbc ultima hot
1

GBC Ultima 65 laminator?

My GBC Ultima 65 laminator keeps overheating because the bottom roller wasn't heating, so the top would get t... [Read more]
Mend wont heat up
2

how to fix GBC Ultima 65 roller that won't heat up?

The top roller of our GBC Ultima 65 heats up but not the bottom roller. What might be wrong and how do I fix i... [Read more]
Mend heat ready laminator
1

Heat light continues to flash on my GBC Ultima 65 even though it is ready?

The heat light continues to flash on my laminator even though it says it's ready. Why is that?
Mend hot s burning
1

GBC Ultima 65 Smells Hot, Like It's Burning?

I've Cleaned the Residue From the Ends of the Heat Rollers and Users Say It Still Smells. They have theorized... [Read more]
Mend gbc 65 heat
1

our GBC Ultima 65 control panel is not on?

Our GBC Ultima 65 control panel is not on. The laminate frolled into the heat rollers and the control panel ... [Read more]
Mend gbc ultima 65
1

GBC Ultima 65 Doesn't heat up?

We've replaced the coils and the circuit breaker. Finally checked for power. We have current going into the ... [Read more]
Mend gbc ultima 65 laminator
2

GBC Ultima 65 Laminator?

Laminator runs fine for about 2-3 feet of lamination, then just stops-power is on, heat is on, rollers just st... [Read more]
Mend heat ultima 65
2

Heat roller Ultima 65 Bob Haller you out there???

Bob I have another Ultima 65 that has a heat roller swollen in the middle. (apparently My name is getting arou... [Read more]
Mend 65 up will not run
1

GBC Ultima 65 will heat up but will not run?

The only problem , until now, was that it would sometimes try to go in reverse when were pushing "run" and fee... [Read more]
Mend 65 will not heat up
1

Ultima 65 will not heat up?

Ultima 65 will not get hot enough.
Mend power lights turned
2

GBC HeatSeal Ultima 65 has no power?

The on/off switch at the back lights up when turned to on. However, there is no power to the rest of the mach... [Read more]
Mend laminator heat gbc
1

Ultima 65 laminator heat up but does not run when button is pushed?

Our GBC ultima 65 laminator turns on and heats up. When the heat indicator shows that it is ready, I push the... [Read more]
Mend ultima 65 laminator
2

Where can I get bearings for the ultima 65 laminator?

I see that the bearings for the ultima 65 can be purchased for less than Retail. Where can I get these beari... [Read more]
Mend turned minutes suddenly
1

GBC Ultima 65 power issue?

We have GBC Ultima 65 laminator. Recently when it is turned on, it will heat up for about 5 minutes and then s... [Read more]
Mend gbc 65 heat
23

GBC Ultima 65 keeps stopping?

After turning on my GBC Ultima 65 and allowing it to heat, it runs about 6 inches of film and then stops. We h... [Read more]
Mend laminator ultima 65

Laminator gbc ultima 65 How to reinstall a power switch?
Mend heat ready laminator

Heat light continues to flash on my GBC Ultima 65 even though it is ready?
Mend switch work service

Why does the GBC Pinnacle 27 on/off switch not work?
Mend gbc 4250 power

GBC 4250 No Power?
Mend breaker trips months

GBC Ultima 65 Breaker?
Mend laminator rollers gbc ultima 65

GBC Ultima 65 rollers just arollin' nonstop?
Mend turn machine indicator

GBC DocuSeal 95 Roller Won't Turn?
Mend wont heat up

how to fix GBC Ultima 65 roller that won't heat up?
Mend Office Appliances, Document Laminators

How can I repair my GBC Pinnacle 27?
Mend Office Appliances, Document Laminators

GBC Docuseal95 heats up but rollers wont turn?
Mend Office Appliances, Document Laminators

How Can I Fix a GBC 620 0S,2013?
Mend gbc ultima hot

GBC Ultima 65 laminator?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Document Laminators ...

Other models...

GBC 4250GBC Pinnacle 27

Related Categories

Mend Cash Registers
Cash Registers
Mend Document Shredders
Document Shredders
Mend Fax Machines
Fax Machines
Mend Photocopiers
Photocopiers

Topic

GBC Ultima 65 Laminator Stopping - Fixes