the alarm appears to be working correctly only does not sound if any sensor activated. enter code to set alarm, exit tone sounds for 10 min (approx) when re-entering home entry tone sounds if i enter code, alarm turns off, if i do not enter code and allow entry delay to exspire, nothing happens...... no alarm sounding as it should
Can someone please help for some reason everytime someone walks past the sensor In my landing the control panel beeps and the light comes on zone 4 if I press reset the light goes out but as soon as someone walks past the sensor it beeps again it's driving me
Crazy!
Shell xxx
Shell N
July 2012
try powering down the panel and powering back up i have done this in the past and it has been succesfull turn your fuse box off and open the panel the alarm may sound dissconnect the battery and then power up again by battery first it will go off enter your code then screw back on the lid the tamper light will be flashing press reset then put the mains back on then test it see if it sets and see if it goes off
im sure this will work
Let me know how it goes
Death
Death
January 2010
yes everything seems to be working ok when i take a sensor cover off the tamper sets the alarm off
ken
January 2010
ohh i now get it lol sorry ken i just didnt really understand what you ment at first well when you walk near a sensor are they lighting up ?
Death
January 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.