Accenta 8 - Sensor not working but power/lights on?
Hello, I have an Accenta 8 and recently a builder snipped a wire but then connected it again. since then none of the sensors are working - however the keypad has lights on and power is on. Think the fuse has gone..can i replace this myself without alarm going off or do i need to call an technician. If the former can someone let me know how to do it step by step. Thanks in advance. Much appreciated
AUX fuse has blown. You need a 20mm quick blow fuse, available from Maplin ect.
WARNING mains is present inside the panel, if unsure get someone qualified.
It will go off when opened, enter code and replace fuse blown, a test meter will be needed as a visual inspection is never conclusive. Otherwise its the fuse by the terminal marked 27, the 1st of 3 fuses.
Close lid enter code job done.
As above if unsure call in someone.
Alarm
July 2011
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home alarm systems.