This box has served me well for a few years now, but just recently, it's started to lose its signal and request a channel rescan, showing no picture until the rescan is started. Switching off the automatic update prevents this, but means that periodically, it loses its signal for a few seconds , then before finding it again, flashes up the "Sagem" boot-up page.
My signal indicator shows "high signal" but "low quality" and just 10 of 25 channels are found when i do a scan, only 2 of these shows picture (not moving).
I have heard that noisy internal power due to bad capacitors could cause this. Does anyone recognise this problem? Have anyone managed to repair it?
putte62
September 2009
MY BOX IS ONLY I MONTH OLD AND LOOSES PICTURE 4/5 TIMES A DAY
DAVE
January 2009
You may have developed an aerial problem. Check its orientation and connectors.
If you are convinced that the aerial is OK then bin the box and buy a new one. You have had your money's worth and new boxes are very cheap now.
T
January 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix dtt receivers.