How to mend ... Way Fit Outside

puling to one side may be ball joints ???

hiya all i need a bit of help . i got a ford escort 16.cc m reg orion shape.. when driveing it it pulls to ... [Read more]

how can i remove the inner glass from my ariston oven/a2031or2030or 2230or?

the old seal has failed and the glass has worked loose but i can't get inside to fit a new seal help!!!! plea... [Read more]

fit a thermostat?

how do i fit a thermostat at the front of a hotpoint tcd 62s condenser tumble dryer

How do I thread a new belt on my whirlpool tumble dryer? AWB672WH?

Okay. The belt was not broken but one flange of one tensioner pulley had worn away. I have replaced both... [Read more]

my hoover logic 1200 A3630 still wont spin on the fast cycle!?

Hi all again, My above mentioned hoover washer still won't fast spin eventhough I've fitted brand new motor b... [Read more]

Peugeot 106 engine removal?

Do i need to remove the bell housing with the engine and fit it to the new engine before raplacement

how to gain access to fit belt?

need to be able to gain access to inside of machine to refit a drive belt for a zanussi FLA 1001W washing mach... [Read more]

How do I replace the belt on a Creda Reversair 37382?

I need a diagram of how to fit the belt on the 2 spools.

how do I fit a new seal to my hotpoint aquarious 1200 wd62?

how do I fit a new seal to the door of my hotpoint aquarious 1200 wd62?

how do i fix oven glass door on beko electric cooker?

outside glass door broken,beko will sell me a new one but not the glue used to fit it in,where do i get this h... [Read more]

how can i fit my new timing belt to a vauxhall vectra sri 1994 model?

adiagram of the timing sequence is what i want

Potterton Netaheat 10-16 Mk 1 boiler fan problem ?

I have a Potterton Netaheat 10-16 Mk 1 boiler. It has recently started having problems firing up. These are ... [Read more]

Why does my Glow-worm Fuelsaver MK2 boiler keep blocking up?

I have a Glow-worm Fuelsaver MK2 which keeps blocking with soot in the dischange exchange before the flue. It ... [Read more]

gear linkage on a renault clio 1.4...please help?

hi,driving on the motorway i ran over a breeze block,i was unable to avoid it,it caused damage to my front exh... [Read more]

rear disc brakes on saddan davill?

will the disc brakes from amid 70's or newer fit 12 bolt GM rearend. also what is the bolt pattern mesure? I w... [Read more]

How do I fit a new element(s) in the top oven of my Neff Built in oven?

How do I fit a new element(s) in my old Neff Built in electric oven? The Model No. is GB-1056.71 HCS. The ... [Read more]

how do i fit drum bearings to my hot point washer?

my hotpoint washers drum bearings have gone, can anyone tell me how to take the old bearings out and replace... [Read more]

how do i fit the belt on an Aquarius 800 washing machne?

please could you tell me how to fit the belt on my Aqarius washing machine i can't find somewhere else but the... [Read more]

will the motor from a hotpoint wm64 fit a wm63 machine?

motor gone in wm 63 can I use wm64 as a replacement

how do i wire a radio in my ford mondeo 1.8 1996?

taken the ford radio out want to fit another system in please help tried to fit the radio in didnt work