How to mend ... Hoover 2 1 Vacuum

Why did it stop working?

Haven't used the vacuum in a month (used my Hoover)...turned it on (oreck XL) it ran for a minute and stopped.... [Read more]

trying to fix Hoover mach3.3 vacuum cleaner?

The vac does not suck dirt in to the bag. I found an obstruction in the hose and cleaned it out. Cleaned out t... [Read more]

fabric conditioner not going into machine hoover optima?

the fabric conditioner is put in the drawer the tablets are taken in but the conditioner does not gointo the m... [Read more]

where can i find the thermostat in my dust manager cyclonic 2300w cylender ?

were is the thermostat located in my dust manager cyclonic 2300w vacuum with a hepa filter. hoover say this c... [Read more]

vacuum cleaner?

does anyone have a wiring diagram for a henry hoover

replacing belt on old Hoover upright vacuum?

How can I stretch the belt from the brush to the power head? It is tight.

how to install an on/off switch on a hoover upright vacuum model U5472-900?

how to install an on/off switch on a hoover U5472-900 upright

why is my vacuum not sucking?

why is my hoover hurricane 2100w not sucking?

How can I remove the outside cover of Hoover s3592 canister vacuum?

The on/off button of the vaccum does not stay in the on position. Would like to attempt fix on my own, but can... [Read more]

Hoover hurricane making strange noise and blowing hot air?

What is wrong with my vacuum cleaner? it is not sucking very well and none of the bits of dirt that are vacuum... [Read more]

Hoover Elite Vacuum U5096-930, Need to change the belt & Look for a Manual?

Lost my manual after a move. I have a Hoover Elite Vacuum U5096-903 Serial Number B-72. I need to change my ... [Read more]

Performance light on?

The yellow performance indicator light is not turning off on my Hoover Mach 3.3 vacuum cleaner. I have change... [Read more]

how do I stop my vacuum cleaner from cutting out?

will replacing the exhaust filter stop my hoover pure power cleaner from cutting out. model no.u3490001

My Hoover U57809 windtunnel cyclonic shuts off during use, why?

My Hoover U57809 windtunnel cyclonic shuts off after about 8 minutes of use. I keep the filters clean and emp... [Read more]

how do i remove the vacuum head from the mid section of hoover spinscrub?

There is a crack where the mid section, (where the motor and water containers etc. are), meets the head of the... [Read more]

How does the actuator spring properly installed?

Hoover upright soft & light vacuum, need to know how the height adjuster and actuator spring clip are properly... [Read more]

how do i fix belt onhoover u3525 vacuum cleaner?

need to put a new belt on hoover u3525

Noisy Hoover Vacuum Cleaner U1650?

With belt and brush removed motor runs properly but very noisy

Hoover U5761-900 torsion spring installation?

The spring fell out. How do I reinstall it on my old Hoover bagless vacuum.

su33 vacuum cleaner?

I took the middle of the hoover out to empty it and it won't go back in. I think I am putting it in the right ... [Read more]