How to mend ... Fault Going House Set

Scantronic 9600 Exit doors ?

Hi We bought a house with a Scantronic 9600 alarm already fitted and we had the instructions to change the co... [Read more]

Scantronic 9827 resetting problem?

I have a Scantronic 9800+ house alarm with 9827 keypad. Although the alarm was not set, at 0400 today the ala... [Read more]

Veritas r8 won't set?

As above won't set just beeps until Code is re-entered. On setting our above veritas alarm it just beeps,th... [Read more]

Scantronic 9800 - c1 alternating t1 (Temper Fault)?

I am a homeowner. I need help to reset c1 T1 fault on my alarm system. I have a SCANTRONIC 9800 ALARM SYSTE... [Read more]

alarm goes off after setting and departed from property?

cooper menvier 9448+ alarm system having set the alarm and departed from my house the alarm sounds.On re-enter... [Read more]

gardtec 800 alarm system reset?

I have a gardtec 800 series alarm system. This was installed by the previouse house owner. Last night the inte... [Read more]

Scantronic 9800 problem - how can I get it to work?

A Scantronic 9800 was fitted to my house many years ago and the very elderly previous owner lost the codes and... [Read more]

scantronic 9800 fault?

Hi, I have a Scantronic 9800 on my house and recently it has started to go off in the middle of the day or ... [Read more]

Veritas alarm?

I have had to cut through the cable that runs to the dummy box at the rear of my house to allow for the stairs... [Read more]

my house alarm wont arm because my panic alarm wont work?

my alarm went off 2 nights ago for no reason but a zone was flashing on the alarm itself. today my panic alar... [Read more]

Veritas R8 alarm- zones 'in fault'?

Hi, I have moved into a house with a Veritas alarm (from their website it seems to be an R8 or R8 Plus- more p... [Read more]

scantronic 9651 alarm fault?

The alarm was fitted 3 years ago when the house was built, one year ago it started going off even when unset,... [Read more]

had power failure now alarm not working?

neighbour cut electric power to my house while working on his drive. i had no electric for 5 hours. my alarm w... [Read more]

Flashing lights?

The alarm was set off a little while ago by a fault in the house and since then the 2 red lights have been fla... [Read more]

Accenta 6 - severed wirimg to KeyPad. How to rewire?

Hi, I have an Accenta 6 unit with a single Keypad (many years of fault-free opertion). The wire connecti... [Read more]

My Alarm Bell Box does not work - Help?

I have a “Control 5” house alarm where the external siren does not work when the alarm is triggered. Th... [Read more]

ehat is the fault?

When the house power came back on after a power cut our accenta8 mini alarm system activated even though the ... [Read more]

Power cut has placed a fault on my house alarm?

The power at my house went off for 2 hours and now I cannot set the alarm, the alarm is a veritas r8, 12 year... [Read more]

Reset a call engineer state on a scantronic 9000 series alarm?

I have a scantronic 9000 series alarm that came with my house. My washing machine recently tripped the circuit... [Read more]

Scantronic Alarm system?

I moved into my bungalow April 04 and it has a Scantronic 9452 house alarm fitted by Pheonix alarm systems an... [Read more]