Recent: LG FC930W Safe Mode: Unlock Front Buttons Without Remote

Mend > Home Alarm Systems

Mend Scantronic 9800 Alarm System Fault

Scantronic 9800 - c1 alternating t1 (Temper Fault)?

I am a homeowner. I need help to reset c1 T1 fault on my alarm system.

I have a SCANTRONIC 9800 ALARM SYSTEM.

I managed to rectify the BF by replacing the new battery. I then reset the system. Set the alarm on exit and when entered the house did not hear the chime on keypad. This indicated that my exit door information is not working as it should have given me C6 when I opened the door on exit. I tried to rectify this by attempting to reset the zones. In process I got c1 alternating with t1 system fault. I need help with this if possible.

Subhash
July 2013
ScantronicScantronic 9800Security Systems, Home Alarm SystemsScantronic Alarm System Fault
Me thinks the 9800 is one of the best scanny panels ever made.

She tell you exactly what's going on,unlike most of the rubbish out there.

Listen to gts and trace then correct the C1 tamper,it's not a return prob so that narrows it down.

Very smart panel you have there :)

e manno
July 2013
you ob not know ur alarm ,u don't get the chime on entry,it works only when the system is unset u have a tamper on zone one,the panel is telling you the prob,go find the tamper

gts
July 2013

Automatic Answer

We may have found other answers which could help you.

Click here for Scantronic Alarm System Fault

Related Questions ...

Mend tamper alarm showing
3

How can i get rid of BELL TAMPER message on home alarm?

Hi guys, this is my first time on a forum like this. Our home alarm is showing a BELL TAMPER message so I can... [Read more]
Mend scantronic reset showing
1

how to fix scantronic 9751 K01 Tamper reset?

hi guys, cant seem to reset my Scantronic 9751 system it keeps showing K01 Tamper reset no matter how many tim... [Read more]
Mend security system fault
1

Scantronic 9454 - tamp/fault/service?

Hi Just moved into a new house and when electrician was installing a new consumer panel, he removed the fuse ... [Read more]
Mend scantronic alarm doors
1

Scantronic 9600 Exit doors ?

Hi We bought a house with a Scantronic 9600 alarm already fitted and we had the instructions to change the co... [Read more]
Mend alarm detector scantronic
19

9600 alarm aux problem?

hi there to cut a long story short i have replaced all my motion detectors on my scantronic 9600, i have fitte... [Read more]
Mend alarm security system battery fault
9

Scantronic 9800 bF fault! ?

The system is installed at my inlaws house which has now been let. The internal alarm has suddenly started to ... [Read more]
Mend alarm wrong going
11

Scrantronic alarm gone wrong?

Hi, we had a bF fault on our 9827 scantronic system. The internal alarm was going off every 30 mins. I tried p... [Read more]
Mend security system fault
7

scantronic 9452?

Internal alarm keeps sounding. was working fine until last week, however now keeps sounding. I have replaced... [Read more]
Mend alarm system control panel tamper fault
17

9751 alarm with tamper fault?

Folks, I have inheritted an alarm system with the purchase of a new house. It's a Watson Alarm system but i... [Read more]
Mend scantronic hello system
3

ef/door contact problems on scantronic 9800?

Hello can anyone advise please - I have a scantronic 9800 alarm system and it developed a fault just before Ch... [Read more]
Mend alarm set exit
4

scantroni 9500?

The alarm is triggered everytime it is set with exit fault displayed on pannel,All system test works- change ... [Read more]
Mend alarm fault scantronic
3

Scantronic 9751?

I have an intermittent fault on the 9751. The alarm will ring when the system is not active and there is no wa... [Read more]
Mend alarm security system battery fault
5

how can i stop the item going off scantronic 9827?

i have a scantronic alarm and the panel model 9827 keeps going off saying bf ie battery fault. i understand th... [Read more]
Mend fault scantronic turn
1

How can I turn of my alarm altogether?

I have an 9800 scantronic alarm system bf fault keeps flashing ,how can I disable the alarm system altogether ... [Read more]
Mend keypad system fault
6

Hi men, I have a scantronic 9800+ system ?

Some time ago in this area we had a lightening strike which fried the phones in the house and allso since then... [Read more]
Mend alarm scantronic reading

Alarm?
Mend phone number company

How can I upgrade my Scantronic 9827 home alarm?
Mend smoke security system

Reset system after smoke alarm sounds & user manual request?
Mend security system scantronic

Disable Alarm Scantronic 9800?
Mend security alarm tamper

Tamper won't go off?
Mend alarm security system battery

Scantronic 9427 Alarm?
Mend alarm security system home security

Scantronic 9651 alarm?
Mend scantronic alarm battery

How can I stop beeping?
Mend system reset scantronic power

SR system reset on Scantronic 9827 after total power failure?
Mend alarm panel home alarm scantronic

House alarm Scantronic 9427?
Mend alarm security system

How can I reset a Scantronic 9427?
Mend house alarm scantronic keypad

How can I send house alarm?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Other models...

Scantronic 4600Scantronic 500rScantronic 808Scantronic 816Scantronic 9000Scantronic 9100Scantronic 9200Scantronic 9425Scantronic 9448Scantronic 9448+Scantronic 9448ESScantronic 9450Scantronic 9452Scantronic 9454Scantronic 9600Scantronic 9651Scantronic 9751Scantronic 9800+Scantronic 9827Scantronic I-on 16

Related Categories

Mend Car Alarm Systems
Car Alarm Systems

Topic

Scantronic 9800 Alarm: C1/T1 Fault Reset Help