I have a Jaguar combi with low water pressure how do i increase this?
I have Jaguar combi boiler (don't laugh) and the water pressure has dropped to 0.8 and I'd like to get it back up again. The instructions say turn the tap on the filling loop, but with no knowledge of boilers and no diagram in the instructions I don't know what a filling loop is! Any help would be much appreciated.
Hi Erika,
Underneath the boiler you will find a metal flexable hose (silver colour), You wil need a screwdriver to turn on a screw valve to put water back into the system. You will hear the water going through. Before doing this press the bottom left hand button on the control panel to show the pressure. The manuel will tell you how to do this. Finally do not exceed the pressure of 2.6 or the system will vent itself. If you do this by mistake it's not a problem you will just need to go through the process again. Hope you find this usefull...
bob
November 2007
filling loop is a flexi pipe found under boiler between two pipes with a tap at one or either end
skooter skooter200@aol.com
June 2007
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix home heating systems.