Recent: Windows 11, Dell 5450, JBL Bluetooth headphones?

Mend > Chainsaws

Mend Craftsman C944.411371 Oil Bar Chainsaw

Chain oil leakage CRAFTSMAN C944.411371 16in Bar?

I have a Craftsman 16 bar chainsaw. It has seen very little use.
Cannot keep chain oil in it. It seems to leak out of a port behind the Bar Plate Mount. I have cleaned the area thoroughly is there something missing that should be in that port?

Martin
December 2006
I also own the same type of saw. That part you think is leaking may not be the case. If your saw casing is an aluminum cast case it could be leaking around your oil fill hole, then running over to the side by the bar. The threads can easily get stripped out or the lid threads are not as tight as they were when new. The cap is not your hard plastic like the new ones now or the older style like mowers that are metal. Try to find a junk mower with a cast aluminum plug, go to your local hardware store and get a rubber gasket to fit over the threads and screw that in. That stopped my oil leak and that might stop yours too,and save alot of money.

steve
January 2007

Automatic Answer

We may have found other answers which could help you.

Click here for Oil Bar Chainsaw

Related Questions ...

Mend How to mend it?
2

How can i mend my mcculloch 7-42 chainsaw?

On the main block of the chainsaw the oil is dispersed by two oil bleed holes which feed chain oil onto the ch... [Read more]
Mend How to mend it?
7

husqvarna chainsaw 142, wont tickover?

142 has been a poor starter, I changed petrol and oil 2 tmix, and set spark plug gap to 20 thou. Got it to st... [Read more]
Mend chainsaw bar chain
4

how can i fix my husqvarna 235 chainsaw?

when bar oil tank is full of oil it does not oil the chain at all
Mend chainsaw oil chain oiler
1

why won"t my husky 455 chainsaw oil the chain right ?

my husqvarna 455 rancher will not oil bar and chain right. is it because the oiler is bad?
Mend leaks bar oil
1

chainsaw leaks bar oil?

MY Stihl 028av chainsaw leaks a lot of bar oil after sitting unused for a week or more. The oil pump seems to ... [Read more]
Mend bar oil hot
1

chainsaw bar oiler?

My craftsman chainsaw with automatic bar oiler does not oil. bar gets very hot
Mend gardenline model exactly
1

How can I fix an oil leak on my chainsaw?

The chainsaw is a Gardenline, model LT84009, and I think it's the bar oil.I can't see exactly where it's leaki... [Read more]
Mend How to mend it?
2

my new bar on my stihl 034 looks burnt on the bottom why?

I recently purchased a used stihl 034 chainsaw. I replaced the bar before I used it. The brand new bars paint ... [Read more]
Mend chainsaw motor chain
3

ryobi chainsaw ?

oil from bar lube tank is being sucked into the moter and out of the exhaust and not onto the chain.
Mend chainsaw wont oil
1

Husky chainsaw won't oil?

Husqvarna chainsaw md. # 136 2001 doesn't oil the chain, the ports and bar are clean, it is like the pick up... [Read more]
Mend chainsaw oil leaks
7

How can i fix my Stihl 023 chainsaw?

Basically, my oil leaks from the chainsaw, but the bar will not oil, making the sprocket extremely hot and dam... [Read more]
Mend spark plug chainsaw start
1

bar oil on spark plug?

I have an older craftsman chainsaw i went to start it and noticed it seemed to be locked up. I removed the spa... [Read more]
Mend chainsaw bar oil Homelite
5

homelite super 2 chainsaw--- no oil going to chain?

I just bought an old homelite super 2 saw with adjustable oiler. I can't figure how to oil the bar/chain. Che... [Read more]
Mend How to mend it?
8

Husqvarna 266 XP - doesn't lubricate chain bar anymore?

My Husqvarna 266 XP abruptly stopped self lubricating the chain bar. It's got lots of bar oil, but the oil no... [Read more]
Mend chainsaw bar clutch
1

bar not oiling on my electrolux petrol chainsaw?

Electrolux MAC 335 (Ecopi Italy Type III Ser 530 057701) The bar is not being fed with oil. Oil in tank bu... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Chainsaws ...