how do i re pressurize a baxi 105e system?

the bolier installer should have put a non return valve on the heating return pipe and a tap on the cold water feed. Link then with a filling loop hose and add pressure between 1 and 1.5 bar.

Remove the loop after filling and store in a safe place.

Steve
November 2006

I believe if you look under the boiler there are approx 5 pipes, 2 of which will be linked by a flexible pipe.

On these will be taps (wellon mine there are!). Open one then the other slowly, keeping your eye on the pressure guage.

Raise the pressure to 1-1.25 bar and close the taps.

Steve
November 2006