Mend > Washing Machines

Mend Fisher and Paykel MW512NZ Error Code Washing Machine Rinse Cycle

Fisher and Paykel MW512nz washing machine stops on wash cycle and rinse?

Does anyone know how to test your machine to get the error light code up to determine what is wrong and how to fix it? Fisher and Paykel MW512NZ washing machine does not fill from cold water anymore (only drips) and when on wash cycle it stops and beeps (as if off balance) and these lights light up:HOT and COLD. then if you push to the forward button to try and move past this, it will do it again. until finally on the final rinse cycle and then it will have the same problem again.

Steve
February 2013

Fisher and Paykel Fisher and Paykel MW512NZ Household Appliances, Washing Machines Error Code Washing Machine Rinse Cycle

The problem is the cold valve. The hot & cold lights are flashing to tell you it is not getting water in fast enough. Same again on the final rinse where it is trying to fill again for the deep rinse. Fit a new valve. Old one is not repairable.

Lincoln Appliance NZ
February 2013

if it isn't filling then you need to address this issue.check water is getting to the machine at pressure.check inlet valve and if only dripping suspect the valve as faulty

CK
February 2013