Recent: Hitachi vt-m70em?

Mend Washing Machines

Mend Household Appliances, Washing Machines
Find out how to mend it for free.
Ask Question
Mend Household Appliances, Washing Machines
Free repair help for washing machines

Mend washing machines ...

Mend washing faulty valve
2

Miele W800 novotronic washing machine?

Hi i have a Miele W800 novotronic with a faulty triple inlet valve which is connected with a four pin connecto... [Read more]
Mend lg washer cycle code

Programme timer?

Lg intello washer WM1480FHD Programme stop 3 minutes into cycle, whatever cycle. No error code, just switches... [Read more]
Mend Household Appliances, Washing Machines
1

Washing programme stops after 3 minutes?

LG intellowasher WM1480FHD Does one complete wash, then on second it starts to wash then stops 3 minutes into ... [Read more]
Mend Household Appliances, Washing Machines

Lg 7kg dd?

I have a problem with the electronic door catch & have to push the contacts back & forward then it works. Are... [Read more]
Mend Household Appliances, Washing Machines
1

I cannot cancel the delay function on indesit wxl 05?

When i start my indesit wxl 105 whashing machine the delay time will automatically set to 2h and I cannot canc... [Read more]
Mend Washing Machines

Mend > Washing Machines

Mend Washer Model Machine

How do I fix Fisher and Paykel washer Model IW810AU with error code 43?

I have an error code 43 on my Fisher and Paykel washing machine. The model is IW810AU. It is starting and stopping during the cycle...stopped on the first rinse and did this.

Rebecca
March 2008
Household Appliances, Washing MachinesWasher Model Machine
Subhanallah, Just as Norman said. I Removed the top panel and the processor underneath it. There is a small micro switch under the processor. The two connectors that fasten to this switch had accumulated corrosion over the years. I cleaned these connectors and reattached them. Problem was solved.Thank you

Sameer
January 2011
I Removed the top panel and the processor underneath it. There is a small micro switch under the processor (balance sensor). The two connectors that fasten to this switch had accumulated corrosion over the years. I cleaned these connectors with emery cloth and reattached them. Problem was solved.

Norman
June 2010
Replace the out-of-balance switch located under the computer on the right hand side.

Paul Levy
April 2008
Mend Household Appliances, Washing Machines
Free repair help for washing machines
Mend Household Appliances, Washing Machines

Bosch maxx 6?
Mend Household Appliances, Washing Machines

Bosch Classix Type WKM41 front loader washing machine?
Mend washing faulty valve

Miele W800 novotronic washing machine?
Mend Household Appliances, Washing Machines

I cannot cancel the delay function on indesit wxl 05?
Mend Household Appliances, Washing Machines

Washer hw50 - 1010w?
Mend Household Appliances, Washing Machines

Washing programme stops after 3 minutes?
Mend hotpoint wt960 spin

Hotpoint wt960?
Mend machine shut door

How can i fix my Ariston AIB14 Advantage Washing Machine?
Mend seal front piece

How to fit new seal on hoover washer/dryer?
Mend Household Appliances, Washing Machines

Whirlpool AWO/D 4505?
Mend start wash dry

Indesit wd11 wont start wash or dry cycle?
Mend flashing h20 hotpoint

Washer dryer WD640 flashing H20 error?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.

Related Categories

Mend Knitting Machines
Knitting Machines
Mend Sewing Machines
Sewing Machines
Mend Stairlifts
Stairlifts
Mend Steam Cleaners
Steam Cleaners
Mend Steam Irons
Steam Irons
Mend Tumble Dryers
Tumble Dryers
Mend Vacuum Cleaners
Vacuum Cleaners

Mend Household Appliances, Washing Machines
Free repair help for washing machines

Try fixfault.com to fix washing machines.