Recent: Safely remove screen protector from a Macbook Air?

Mend > Vans

Mend Vauxhall Out Change Shaft

what fluid comes out when you change a drive shaft?

hi any help would be great i fitted a off side drive shaft as the old one was wineing on but put the new one on and its still wineing on at speeds of 50plus im thinking its dry and when its getting hot its making the noise. as fluid came out when i took the old shaft out its a 51 reg vauxhall movano 3500

jamie watson
September 2012
if it has a support bearing on the o/s shaft I would check that out and also your wheel bearing,both sides,it can sometimes be tricky to determine what side is causing the problem,it sounds like you lost a bit of g/box oil,I would check the level on that also

cdc
September 2012

Automatic Answer

We may have found other answers which could help you.

Click here for Out Change Shaft

Related Questions ...

Mend replace gear singer
2

how to replace the vertical shaft gear in a singer 247 sewing machine. ?

I bought a vintage sewing machine and am trying to get it functional again. It was sewing great after new belt... [Read more]
Mend replaced bearings machine
1

what is wrong with my F&P smart drive 601?

I have recently replaced the bearings and seal on my 601. I have reassembled the machine correctly (I think).... [Read more]
Mend lawn mower drive belt Mountfield
1

How do I change the drive belt on a mountfield 83309?

Hello! I need to put a new drive belt on mr mountfield emporer (21") model no 83309. How do I get the belt o... [Read more]
Mend Renault Sensor Crankshaft
2

RENAULT SCENIC 55 PLATE?

I have a renault scenic 55 plate my wife went out in it just after the heavy snowfull the car had not been use... [Read more]
Mend mountfield emperor drive
1

Belt change Mountfield Emperor?

Not sure of how to get the drive belt off the above?Managed to get it from the roller end but the driven end I... [Read more]
Mend washer repair motor
1

How can I repair my maytag washer? ?

during the spin cycle about half of the time the drum will not spin, but the motor and belt spin properly. Is ... [Read more]
Mend change engine bottom
1

how to change a craftsman engine pully?

i took the bolt out of the bottom of the pully shaft but it still wont come down.
Mend wheel bearing transit rwd
3

rear wheel bearing on a 2004 rwd transit?

how do i change rear wheel bearing on my 2004 rwd with abs its single wheel lwb 2.4 ive been told its abig job... [Read more]
Mend singer material bobbin
1

Singer 3515 - not stitching - new gear and re-timing?

Material became caught under foot / in bobbin case and was pulled out. The gear under the bobbin mechanism on ... [Read more]
Mend vacuum repair assembly
2

kenmore model 116.38812890 repair lower plate assembly?

I need a manual to this vacuum cleaner. I'm attempting to change out this part. I've almost gotten everything ... [Read more]
Mend How to mend it?
1

Sprocket removal for chainsaws OLEO MAC (year 1988)?

The teeth of the sprocket are worn out and I have to change it. But I have a hard time removing this sprocket... [Read more]
Mend remove change unable
1

wheel bearing frontera sports?

how to remove the half shalt from a vauxhall frontera to change wheel bearing i am unable to extract the half ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vans ...