Recent: Safely remove screen protector from a Macbook Air?

Mend > Gas Cookers

Mend Electrolux Built Years Ago

Fix built-in Electrolux oven door?

I have an Electrolux built in oven installed about 12 years ago. The outer oven door has come loose. The door is fixed at the bottom corners by two small plates - each with two small "pegs" which locate into two holes on the bottom corners of the door frame. The two small plates have become partially loose from the door frame. They have been originally fixed by some sort of "Dow Corning" mastic which I assume is high level heat resistant.
To repair I propose removing the small plates - cleaning off the old adhesive and re-sticking the plates back onto the door and refixing the door back onto the frame. Can you identify / sell the adhesive / mastic which I should use ?

David Leggett
December 2010
clean the old adhesive off and clean glass and brackets with surgical spirit or lighter fluid.You can then use dow corning silicon as it withstands heat or if you want to use a product designed for the job copy and paste this in to search engine
http://www.absealants.co.uk/product_10-2-_High-Temperature-Resistant-Silicone---Oven-Door-Sealant-Repair.htm

ck
December 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Built Years Ago

Related Questions ...

Mend bought house ago
2

Disconnecting an Optima XM system?

My Aunt bought a house almost 10 years ago with an Optima XM alarm system already built in. She's now 80 years... [Read more]
Mend security system home
3

mykeypad lights up but there is no power light. I cannot set my alarm. ?

My keypad lights up, but there is no power light. I am unable to set my alarm. It was fi e a few weeks ago. An... [Read more]
Mend 3rd time years
1

how can I fix my Maver Milk Frother?

The boiler packed up for the 3rd time in 2 years, every time the warranty people fixed it and put in a new boi... [Read more]
Mend fridge repair samsung
1

need to fix samsung rs21wcsv american fridge freezer?

Hi we have a samsung RS21WCSW american fridge freezer, about 8 years old. The fridge part started making a fu... [Read more]
Mend unit built dishwasher
2

how can i fix the laminate that is peeling off my kitchen units?

the laminate on the kitchen units is peeling off in places where the unit is next to a kitchen appliance such ... [Read more]
Mend water shut supply
1

water does not shut off completly, float sits to low?

When the toilet is flushed the water supply does not shut off completly, when I lift up on the float arm it sh... [Read more]
Mend boiler heating control panel
1

Potterton control panel not working?

A trip switch kept tripping the sockets and finally I discovered the screen on the Potterton control panel EP2... [Read more]
Mend doors will not
1

Patio Doors locked and will not open ?

The patio doors on my house which was only built about 5 years ago, when we locked the door we heard something... [Read more]
Mend fan light not please help
1

Cooker Hood fan or light not working - please help?!?

A couple of weeks ago I pulled up the extractor hood on my cooker (AEG Electrolux EPSO MSS, Product No. 9497/1... [Read more]
Mend problem house built
2

Dimplex CXLN combined storage heater problem?

We have 3 Dimplex CXLN combined storage heaters, installed when the house was built about 15 years ago. The ro... [Read more]
Mend working three mind
2

Humax PVR9200T not working correctly?

I have had three HUMAX PVR9200T machines for over 2 years and up to recently have been working perfectly but ... [Read more]
Mend stop intruder light
3

How can I stop SL8 Intruder Alarm Outside Light Flashing?

We have an SL8 Intruder Alarm System, installed brand new by bulider when house was built 3+ years ago. We've ... [Read more]
Mend security system home security sensor
2

scantronic 9651 alarm fault?

The alarm was fitted 3 years ago when the house was built, one year ago it started going off even when unset,... [Read more]
Mend code alarm installed ago
2

engineers code?

Accenta house alarm system installed 2 years ago, installer no longer in the business. Is the engineers code s... [Read more]
Mend started months appears
2

My carpet has got bubbling in 3 places!?

Could anybody advise me on as to why my 3 year old carpet has started bubbling up in 3 different places for th... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Gas Cookers ...