That screen has always been kept clean. It would appear that the valve could be causing the leak. The control rod is aligned, so I removed the valve assembly and the rear shuts off the flow and the tank is providing water to the pump freely. Where do I go next?
Mike Pirro
December 2009
When we use this steam vac it continues to slowly leak both during operation and when turned off.
Mike Pirro
December 2009
Remove the clear plastic cover over the spin indicator (green and black disk that spins). There is a screen that gets plugged with lint. It sometimes is so bad that it appears to be a foam filter. It is not. Is the lint covering the screen that allows the vacuum to spin the brushes and the indicator.
Mark
September 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
