How to mend ... Too High Off

Canon MP600 duplex printing?

When duplex printing, I can only get prints out to appear as draft, even if I set it to High or Standard. Does... [Read more]

my j reg clio is leaking?

when driving my clio is reaching high temps and then when stopped the water all leaks out until brown rust col... [Read more]

pressure too high on vokera excell 80 sp?

please help i was turning the pressure up on my vokera excell 80sp and it went up to 4 and started making a ve... [Read more]

How to fix hotpoint ctd 80?

Hi, my dryer works for a few seconds normaly then goes into F10 mode. This happened after I opened the door a... [Read more]

How can I get my treadmill to operate on high speed?

I have a Pulse Strider 2600 Treadmill that was given to me as a gift. However, it only operates on Moderate s... [Read more]

What causes brakes tolock on?

I have a Corsa Merit 1998 when the car is not used regularly or is left outside in the rain the brakes will ... [Read more]

anyone had the same problem on suzuki ap 50 scooter?

bike runs good but will drive in low revs but slips in high revs belt seems ok, had the clutch off & there see... [Read more]

how can i make my clutch like new on a astra 1.4 sxi 2006?

my clutch seems to be quite high. can i tweak it to make it like new again. vauxhall astra sxi 1.4 2006

Pilot light is on but nothing happening! (Myson Apollo 30/50)?

When I finally get the pilot light to stay on, nothing happens when I put the electric back on and turn thermo... [Read more]

what is wrong with my glow worm swift flow 100?

everytime the boiler starts up the pressure gage shoots up to a high level, a friend suggested loking for the ... [Read more]

corsa c wont start?

corsa c 1.2 wont start ,,,spark ok ,,,fuel ok ,,,diognostic computer states cam sensor ,,,voltage high,,,repla... [Read more]

my potterton profile 80 will not ignite but the fan is running ?

my potterton profile 80 will not ignite but the fan is running and the thermostate is on high

Peugeot 406 Power Loss?

I have an S plate Peugeot 406 2.0L HDI which is is losing power when I put my foot down. Everything is fine... [Read more]

Seat Toledo Throatty sound?

Can any one advice me at all I have a Seat Toledo 1800cc 20V auto this car is surperb but have a bugging quest... [Read more]

I have an oak grandfather clock standing approx. 35" high. ?

Face says Hammond. Needs a pendulum (lost in shipment). Can't find a similar clock anywhere. Can someone he... [Read more]

pressure too high ?

my ariston boiler goes too 3 bar from 1 bar idle

28cdi high pressure?

hi the pressure on my 28cdi has gone up to 3 bar. i think it might be the pressure vessel or the water to wat... [Read more]

How to stop Xsara Picasso from misting up?

I own a Xsara Picasso LX. Earlier this year I changed some lamps on the heater control panel, to do this I ha... [Read more]

worchester boiler 24i problem ?

worchester boiler 24i problem ,how high should the pressure bar go up when radiators are on.mine is on 1bar bu... [Read more]

1996 Ford Mondeo 1.8TD wont start from cold??? ?

My 1996 Mondeo 1.8TD with the Endura engine is a pig to start from cold, it requires up to 3 double bursts of ... [Read more]