How to mend ... Still After Replaced

no hot water after replacing 3 way valve?

We have just replaced the 3 way valve on our central heating system, but have no hot water. When timer comes ... [Read more]

spicer transaxle?

My transaxle (spicer 170289) went out and I replaced with used (spicer 14267) one. I can't seem to find neutr... [Read more]

Optimax XM6 untruder alarm - can I repair?

My Optimax XM6 seems to have seized up it will not respond to any buttons being pressed at all, it does not ev... [Read more]

problem with power?

ford mondeo tdci had a worn pump,all injectors and pump replaced with new engine running as sweet as a nut c... [Read more]

smeg spa hob - broken?

i dropped a can on the ceramic hob and it is broken. do i need to replace the whole hob or do i just replaced ... [Read more]

controls/top panel?

i replaced the heating element in the dryer( fer231a52) but while reassembling, the three wires became disconn... [Read more]

controls/top panel?

i replaced the heating element in the dryer but while reassembling, the three wires became disconnected from t... [Read more]

revs wont drop properly?

hi got a vauxhall frontera 2.2 petrol on a x reg when u rev it the revs drop very slowly. manifold was cracked... [Read more]

Can't remove bathroom sink tap to replace washer?

My bathroom sink tap is chrome with 4 little wings for a handle and instead of popping a cap on the top and th... [Read more]

White Knight Tumble Dryer 767c Bearing Replacement?

we have already replaced a set of bearings on this machine, but the problem has started again making noise and... [Read more]

zanussi washing machine zjd1285 spin problem?

load placed into machine washes, drains, spin starts then rinses takes last water drains but tries to go into ... [Read more]

My LG Intellowasher dd wm-1480 FHD 7kg will not spin ?

My LG Intellowasher dd wm-1480 FHD 7kg will not spin ? It washes & rinses perfectly but will not enter the spi... [Read more]

How can I get veirfy my radiators are operating properly?

MY Worcestero Bosch high flow 400 had not been working for the past month. Recently the Heat exchanger and pu... [Read more]

how can i fix my jag?

My 97 Jag will not start. I just replaced the ECM and it is turning over just not starting! Any suggestions?

Sovereign petrol lawnmower Oil problem Part 2!?

John - thanks for your reply to my earlier question. I replaced the air filter which looked a little oily in p... [Read more]

kenmore vac #116.25915503 starts but won't run?

when i press the button to turn it on it starts but only runs a few seconds. i have replaced the pc board with... [Read more]

Dolmar saw will not start?

I have a dolmar 109 chainsaw. but it will not start i have removed the sparkplug to see if there is a spark. N... [Read more]

What is wrong with carb on this briggs engine ?

Engine starts fine, but won,t run normal . getting way to much gas, and there are no adjustments on this 3.75 ... [Read more]

Why does my Volkera Option cycle on and off when the mixer shower is on?

Have a volkera option combi boiler. Operates fine with hot taps upstairs and downstairs and with central heat... [Read more]

My Husqvarna 125 will not run right?

When I have it idling in full choke or half choke and press the throttle it dies. It ran fine last year. I mix... [Read more]