How to mend ... Set Internal Presumably

head keeps dripping internal set fitted 4 years ago manual mira 88?

I have a Mira 88(manual shower) and it is dripping from the head. I fitted and internal set 4 years ago. How c... [Read more]

Accenta G3 bellbox sounds for only 5-10 seconds on alarm?

The alarm panel when activated only sounds the exterior bellbox for 5-10 seconds then stops but the internal s... [Read more]

Re Panasonic NNA524m?

Blows internal fuseF2 10amp,when replaced display works and allows set up. As soon as micro power on fuse blow... [Read more]

no sound when tv is set to hdmi?

just had sky hd installed,but when they set the tv to hdmi there is a great picture,but no sound unless you pu... [Read more]

Bosch Exxcel 1400 Express-trips power RCD after 20mins any cause/fix? ?

After some 20 minutes into wash cycle the m/c trips the RCD. I've checked the blantantly obvious of the plug, ... [Read more]

Adjusting time on Pendant Watch?

I have a Black Karabiner Pendant Watch. Which I bought from Coopers of Stotford, I recently had the batte... [Read more]

Tamper flashing & cant set system?

Veritas 8 system. had to open pir to paint around, b4 opening entered engineer code and then entered 00 which ... [Read more]

Re-coding my key fob?

I just bought a new key-fob and reset it, which has set the immobilizer but the remote central locking is not ... [Read more]

Veritas R8 remote not functioning properly after power outage?

Lost mains power and internal alarm sounded my daughter attempted to reset bu alarm just timed out after 20min... [Read more]

How can I set my Scantronic 9448+ alarm?

I have followed instructions from helpful suggestions on this site and have also got copy of installation guid... [Read more]

Location of external temp sensor? (Re too cold exterior)?

I have a Kelvinator K13/12 GB fridge freezer model 39010038 (fridge top, freezer below, no auto-defrost, singl... [Read more]

securit 700 L will not reset?

Internal sounder activated when in unset mode. Tamper led now flashing constantly and i cannot reset system .... [Read more]

ravenheat csi85t intermitting fire up?

our csi85t is trying to fire up ,fires for 5secs and fails for 5 goes on on on then gives up is it temp senso... [Read more]

Veritas 8 part set no external bell?

When my alarm is on part set if it is activated only the internal alarm goes off not the external box - any id... [Read more]

Scantronic 9448+ goes off before fully set?

Following a power cut in the village the alarm triggered. When the power came back the alarm was reset using ... [Read more]

input the codes into scantronic 9450 wired alarm?

Hi, I am trying to assist my 93 year old neighbour with his faulty alarm system. After a recent power-cut, his... [Read more]

Vaillant VCW GB242 high pressure ?

I have a VAILLANT - VCW GB 242 EH boiler installed by the previous previous owner and no manual. When the hea... [Read more]

pressure loss in my Vaillant boiler?

my vaillant boiler model VC GB 242 EH is installed as a pressurised central heating & hot water system. The... [Read more]

Fuse in the switch spur has blown?

Replaced the 3amp fuse this afternoon. The system works fully for an hour or so. I put it on boost on channel ... [Read more]

alarm sounding false alarm?

i have a veritas alarm and even when the alarm is not set the internal sounder goes off . the outside sounder... [Read more]