How to mend ... Problem Help Panel

Leasure battery?

Leasure battery 4yrs old and car & leasure battery charger which has panel lights indicating rate of charge. ... [Read more]

Simens HB96540GB/01?

Good morning all, Wondering if anyone can advise on a problem I have encountered on the above oven. I re... [Read more]

Creda condensing tumble dryer shorting to earth?

The ECR trips on the house main fuse panel. If i disconnect the heater element it does not. If I measure the i... [Read more]

How can I fix my Ariston combi boiler?

My Ariston combi boiler stopped working the other day and I couldn't see what was wrong - pressure was ok etc.... [Read more]

I have a problem with my Melcom ST6100 alarm control panel?

I have recently installed a melcom ST6100 alram control panel, however whe I attach the alarm box the tamper l... [Read more]

Glow worm 18hxi?

Green light comes on & there is a temperature reading but the green light then goes off again, there is no fau... [Read more]

Diplomat Dishwasher - Only Cold Setting works?

I have a problem with my diplomat dishwasher only 2 years old. All of a sudden the program only lights at cold... [Read more]

Control panel - Kitchenaid KUDS01FL?

When I push the button for any cycle on the touch pad (control panel) the cancel button lights up, but not the... [Read more]

potterton EP2000 (old brown one) problem - CH always on ???

I have a Potterton EP2000 - problem is when i try to put the HW slider on any setting i.e twice/ once/ 24hrs, ... [Read more]

Zanussi ZDT6053 Control Panel?

I have a problem with the ON/OFF switch. I'm looking to repair myself. How easy or difficult is it to get into... [Read more]

zanussi wjs1265w washer/dryer no error code now?

was showing e90, checked and re-fitted blue connections on front panel. no code showing now but goes straight ... [Read more]

Bauknecht TRKE 6960/P tumble dryer electrical problem?

After a power cut of about 2-3 hours, we found the dryer "dead" electrically speaking when the juice came back... [Read more]

Could the NVM chip be dead after 13 years?

I put my system into engineers mode (0xxxx then opened panel, E displayed). This was to allow me to disconnect... [Read more]

problem with daewoo frsu20 dai?

the door to the freezer was left open, now the water loight is flashing and nothing works on the panel

The fridge part of my fridge freezer is not cold enough?

The fridge part of my hotpoint HM3121 fridge freezer is not cold enough. The back panel had an ice build up wh... [Read more]

AEG oko lavamat 72620 showing Cd on panel?

The control panel is showing Cd on panel have fitted new door lock but is still showing same, any ideas what p... [Read more]

boiler lights, but just ticks over, IE: it won't go to full flame?

The boiler is a Radiant RS24. It lights, but stays on tickover. We've had a new pcb, limit thermostat and heat... [Read more]

to re set after power failure?

after a recent power failure the alarm needed to be re-set,however a failure always kept showing up on the con... [Read more]

opertating problem..model potterton flamingo 50?

when ever i turn the hot water my heating system turns on aswell.. and the hot water doesnot come straight awa... [Read more]

Scrapping Noise on the Hotpoint vtd00?

Hi all Ive just replaced the back bearing and the belt but the machince is still scraping noises, i had to t... [Read more]