Recent: Will I need to replace my garden tap?

Mend > Notebooks/Laptop PCs

Mend Toshiba P300-21F Display Turn Working

no display?

toshiba satellite pro p300-21f,
turn on and nothing, NO lights NO bleeping NO display.
was working fine a few hours ago.?

colin
November 2018
thanks electro,
I have another cpu and someone who can fit it.
will also try ram.

colin
December 2018
Have power and the fan work.
NO POST.
There is power for the motherboard as the fans are connected to it.

That look bad.
It could be from benign to slightly bad to very bad :
1) Unseated RAM.
2) Bad RAM.
3) Corrupted BIOS/UEFI (low probability).
4) CPU failure or Mother board failure.

Disconnect and remove the battery before proceeding !
Unseated RAM (benign):
Open the case.
Locate the RAM modules.
Remove them one by one and put back in the same location.
Close the case.
Power up.
If it work, YES ! it was about nothing.

It don't work.
Bad RAM (not to bad).
Open the case and remove the RAM modules.
It may be interesting to place it in another computer and perform a memory test, or swap it with the RAM from another computer. Not for the faint of hearth.
Buy new ones. Bring and show the original modules to the seller. You want the same or larger amount.
Put the new RAM in place.
Close the case and power up.

And now for the very BAD = probably dead computer :

As you apparently did not recently flash your BIOS/UEFI, a problem there is unlikely. If it's just a configuration problem, it may be possible to reset it to factory default, IF it can be done with a jumper or similar. A bad flashing can brick a computer and make re-flashing impossible.

If it still don't work, it mean that your CPU or motherboard have probably failed and need to be replaced. You don't have the tools to diagnose, and probably lack the knowledge. Need a professional.
Easier, and probably cheaper to get a new computer.
Keep the drive from the old computer and put in an external enclosure. All your files are there, intact.

Electro
December 2018
Hi,
yes
I have power and the fan is working but no display.
battery and charger are OK.
could it possibly be the cpu?

colin
December 2018
It looks like you have no power.
Can it turn on when connected to the charger ?
Is the charger properly plugged in ?
Can you try with another charger ? If so, does it work ?

It can be a faulty charger or a faulty battery.
Check both and replace if needed.

Electro
December 2018

Related Questions ...

Mend machine display working
2

whirlpool washing machine no power?

my whirlpool washing machine awoe8748 showed an F on the display and the service light was on (it had stopped ... [Read more]
Mend printer epson drivers
3

how to fix printer error see your documentation problem?

I have an Epson R360 and attempted to print a cd. As I put the tray in the printer didn't respond, when I look... [Read more]
Mend oven cooker stopped working
1

my hotpoint sy36x oven stopped working ?

hi there , my hotpoint sy36x wont turn on ...the clock display is flashing and none of the functions are work... [Read more]
Mend button tumble dryer hello stopped
2

anti-crease/end button blinking on Miele Tumble Dryer T5206 (PROFESSIONAL)?

Hello, My dryer has stopped working. The anticrease/end button keeps on blinking, and the display shows the... [Read more]
Mend timer turn working
1

How i can fix my diplomatic cooker?

The display timer is on but as soon as I turn on the cooker or the oven start working but after a while stop ... [Read more]
Mend diagram smeg oven
1

Can you show me a wiring diagram for a smeg oven model SA398X?

I am a licenced electrician working on a smeg oven which has no wiring diagram.The clock has no display and no... [Read more]
Mend temperature sensor freezer
1

Fridge and freezer keep warming up?

Fridge and freezer works for a bit but then the display looks like it's right temp but if I turn it off and o... [Read more]
Mend light power select
2

potterton ep20001 programmer wont light hw?

my programmer will not light up the HW side of the display after a power out. If I select hw it switches the c... [Read more]
Mend help working lights
1

Help Washing Machine Not Working ?

Hi i have a hotpoint aqualtis aq9d and it all lights up but it nothing actually happens......no spin, not fill... [Read more]
Mend turn dial setting
1

Zanussi ZWD12270G1 stopped working?

Our Zanussi has stopped working suddenly. When I turn the dial to a setting, all I get is a faint glow on the ... [Read more]
Mend laguna 1999 car
1

Centre console problems Renault Laguna 1999?

Got in my car this morning and the centre console is faulty. Weird thing is parts still get power, radio w... [Read more]
Mend washing machine display panel power
3

Hotpoint HVF344 Washing Machine not responding?

My Hotpoint HVF344 washing machine is not working. When I turn the power on and select a program, then pres... [Read more]
Mend hotpoint aquarius fault code
1

Hotpoint Aquarius VTD60 Fault code 8?

Appeared to be working but noticed display showed number 8. Not F8. Would not turn off so unplugged. Plugged b... [Read more]
Mend hotpoint washing machine
1

how do i fix my hotpoint washing machine?

my hotpoint ultima wt640 washing machine has stopped working and has a letter 'd' on the lcd display,nothing h... [Read more]
Mend combi 24 he heating
1

Baxi Duo Tec Combi 24 HE - No heating?

Hi can anyone help me? I have got a Baxi Duo-Tec 24 combi boiler. The boiler seems to be working fine as we h... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Notebooks/Laptop PCs ...