Recent: Will I need to replace my garden tap?

Mend > Home Alarm Systems

Mend Bell Box Tamper

Bell box creating tamper?

My lads admitted to hitting our bell box with their football and now the system is showing a tamper,my pin code silenced the interior warning but it won't let me arm the system.

Can it be mended and how?

Debra
March 2013
not too bad debs

gts
March 2013
Thankyou for all your reply's.

Turned out we had to replace the sounder because the cover and lenz were damaged.So rest assured,the kids won't be using the new one for target practice,.

The sounder was cheap enough but the fitting bumped up the price,£126 Inc vat,does that sound reasonable for this type of repair?.
Many thanks.

Debra
March 2013
so are you e mano ha ha ,when it comes to that,so am i,we are a lost cause guys !

gts
March 2013
alarm guy,you are what i allways suspected,a big softie :-)

gts
March 2013
You could do what I always wanted to do and lock them in the cellar with a torch and the full scantronic range of engineering manuals,

Your little luvies should make great engineers or play for accrington stanley.

Ain't punishment sweet :)

Ps my boys never admitted to anything, be proud of yours xxx.

e manno
March 2013
Beat and tie up your lads :P
Nah, joking. Mine did the usual, write on new painted/papered walls (Young), kept pressing incorrect codes into RKP, (Older), knocked a passive off the wall, (more older). And now even older ( How I have not killed them yet is a wonder to me) cost me fortunes.
Don`t ya love them?

If you or a friendly neighbour can go up ladders and remove the lid, it should be easy enough to work out. Put code back in and then make sure all the internal tampers are closed (Springs ect) then lid back on and put code back in.
That should be that.
As you can see, it has a tamper to let you know when unarmed and goes off when armed.

Need anymore help just ask.

And get the boys to kick about a bit lower :P
Also, give em some extra hugs, they can never get enough.

Alarm
March 2013
Rocket science these alarm systems, aren't they!

Disgruntled acorn
March 2013
fix the tamper in the bell box

gts
March 2013

Related Questions ...

Mend light accenta 6
1

Blue light flashing on my accenta 6?

HI we had a power cut and when the power went back on our Accenta 6 alarm went off.....we have the code so use... [Read more]
Mend alarm fault fitted
2

Nexus 8 alarm system - constant bell tamper fault?

My neighbour's home was burgled and the Nexus 8 alarm, which I fitted years ago, activated. Burglars smashed t... [Read more]
Mend bell alarm ringing
5

Replacing vented bell box ?

Hi. Can anyone give me a make of a good bell box, alarm was ringing last night eith tamper fault noticed this ... [Read more]
Mend alarm panel tamper
1

texecom tamper light on when intheory should be off?

I have texecom alarm 8 zone with tamper fault,its a texecom panel connected to texecom SAB reading deep into ... [Read more]
Mend box alarm panel
12

How can i wire my bell box?

Hi I replaced my scantronic 9450 alarm panel with scantronic 9651.I have got the pirs and door co... [Read more]
Mend security system battery
2

Flashing power light?

I have changed the battery in the alarm box but now when I try to reset the system the alarm bell box sounds a... [Read more]
Mend replace bought going
1

I want to replace my optima panel 8EP396A?

I have bought a new panel 8EP396A control panel. How do you stop the bell box going into tamper alarm when I p... [Read more]
Mend bell accenta alarm
3

bell box change?

I have a accenta 8sp 400 mini g3 alarm and have changed the bell box , the old box has 6 terminals strobe +/- ... [Read more]
Mend tamper siren help
1

ade Opimta alarm , how to switch the tamper warning light off and siren?

Hi could any one help, i have a ade optima compact home alarm, i was replacing the guttering and accidenta... [Read more]
Mend How to mend it?
8

C&K active 5 failure?

I came home yesterday evening and noticed the strobe on the bell box flashing but no alarm,on entering the hou... [Read more]
Mend alarm system trigger
2

bell?

Hi there, I have a veritas alarm system, we took our flashguard 100/120 bell box down whilst we got the house ... [Read more]
Mend alarm security panel
17

reset scantronic 4600 control panel?

my 4600 control panel is disconnected from the bell box, the zone dills are set to off, the control panel lig... [Read more]
Mend fault going circuit
1

Optima XL6 alarm Tamper fault?

Optima XL6The tamper alarm is permanently going off. I have shorted out both the circuit tamper circuit and t... [Read more]
Mend security system tamper
15

Accenta gen4 alarm intermittent tamper?

Hi all , i hope you can help. I recently fitted this gen 4, since day one i keep getting tamper alarms when... [Read more]
Mend flashing red green
1

Reson 8 LED's?

I have a reson8 bell box but I can hardly see the LED's flashing. I can see the Red LED flashing when it is da... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems