I have a Matag Washing Machine Heavy Duty..Model# is LAT884OAAW... I was washing clothes on 11/8/06 and it stopped inbetween the rinse and spin cycle...it was full of water and didn't do anything...I unpluged it, moved it, moved the knob and still won't do anything....please help me if you can. Thank you
General principle with any machine that has stopped like that is to turn off electric supply to machine, get a couple of bowls, unhook rubber drain pipe from waste tube, lower rubber tube into bowl at ground level to drain machine. (two bowls allows for time to empty them down sink). When machine is empty rehook pipe, turn dial to spin/drain and switch on electric supply. If you are lucky machine will restart. If it does then dont overload it again! if not call an engineer as it will most likely be the control. good luck.
Trevor S
November 2006
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.