Two rings are working but the other two are not. The two working rings share one PCB and the non working rings share another PCB The touch controls work for the working rings but not for the non working rings
Thanks for your reply CK This is a stand alone Hob built into worktop I am going to cross wire the two rings to find out which ( if any) of the PCBs are faulty
This should narrow down my search
TonyW
November 2012
is there a link in the connection box where you connect your cooker cable too the hob?.If that is loose or missing then it could be an issue.pcb failure is also a possible issue
CK
November 2012
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
