how can i change the pin number?

SD you know nothing go away.

Alarm
May 2012

Here we go again.

SD, as you obviously know nothing about alarm systems, of any type, please don't keep giving out this sort of rubbish any more.
You should by now, going by the number of people who have told you stop giving out incorrect information, that you don't know what you are talking about.

Curt, please don't try anything SD has suggested, you might damage the system.

Shorting any 'Pins' on a circuit board, and they are not always marked, could be dangerous, don't do it.

Do as I first suggested, it's there somewhere

acorn
May 2012

Quite often the way to set a default code, is to remove battery and power. On the cct brd, you could find two pins, marked reset or similar, usually connecting them while powering up, will reset to default. So have a look at the pcb, BUT just disconnecting battery will not do it

SD
May 2012

Unfortunately the manual only tells how to change the code, not how to default if the code is unknown.

A search of Google can find the manual but it is well buried.

acorn
May 2012