Recent: Will I need to replace my garden tap?

Mend > Washing Machines

Mend Zanussi ZWD16720W Washer Mins Code

Fault with washer drier Zannusi ZWD16720W?

When using drier, after about 5 mins fault code appears. Code is E20. I have tried draining the valve on the front each time is full of water, what else can i try?
The machine beeps and will not work on drier mode.

Matt
November 2010
the condensor tank might be blocked with fluff.its the bit under the blower fan,it could also be a faulty drain pump or blocked filter at the bottom right

ck
November 2010

Automatic Answer

We may have found other answers which could help you.

Click here for Washer Mins Code

Related Questions ...

Mend hot point fault code
2

H20 hot point fault code ?

Hi, I have a fault code on an hotpoint WDPG 9640, code H20. The washer still completes the cycle but around... [Read more]
Mend error code washer dryer repair
1

How can I fix my Hotpoint WDF740 Washer Dryer at home?

I have a Hotpoint Aquarius WDF740 Washer Dryer. The wash cycles work fine, but when I try to use a drying cycl... [Read more]
Mend repair fix programme
1

how can i fix my washer dryer hoover 1200 display E1 code,all lights flash?

when i start wash on any programme after 5 to 10 mins E1 code appears and machine stops with all lights flash ... [Read more]
Mend error code washing machine pump
4

Fisher Paykel error code 011010000 (104) hums and code lights - Won't turn ?

we were running the washer and it had popped the circuit. I reset the circuit and restarted the washer. It sti... [Read more]
Mend mins cycle washer
1

Bosch Excell Washer/Drier stops 7 mins into dry cycle?

I have a Bosch Excell WWD45 washer drier - the wash cycles work fine however if I put the machine onto Intensi... [Read more]
Mend washer dryer program
1

Problem with Indesit washer dryer WD10 [UK]?

The program dial keeps revolving and the LED flashes 5 times. Which is error code 5, indicating trouble with t... [Read more]
Mend washing machine samsung error code
3

samsung washer displays code H2?

after 10/15 mins washer displays H2 code and stops washing
Mend error washer dryer
1

Hi my Znussi ZWD1270S wont dry and has E10 error code?

Hi there My washer dryer has stopped drying and when it does get to the dry cycle it stops counting down and t... [Read more]
Mend washing machine error code zanussi
1

what does an e90 error code mean?

i have a zanussi fjs1225w washer and 5 mins into a wash it started bleeping and the e90 error code came on.
Mend washing machine PCB error code
2

AEG L16810?

original fault washer drained after 10 mins due to defective recirc pump this has been replaced However this... [Read more]
Mend bosch washing machine error code
1

Error code F05 on Bosch washer?

My washer begins to fill, stops and bleeps after about four mins with the error code F05. It's about five yea... [Read more]
Mend washing machine error code zanussi
1

Help! What does Error code E90 mean on my Zanussi FJD1666W?

I am using my washer on cottons, 40, 1600, Quick, then suddenly it begins beeping and displays error code E90 ... [Read more]
Mend error code 1200 three
5

What is this error code for Hotpoint WD420?

I have a Hotpoint washer/dryer WD420 (1200). It's about three years old. Problem is that when I select a wash... [Read more]
Mend dishwasher error code Diplomat
1

Error code FA on diplomat dish washer anyone got any ideas?

My dishwasher starts a cycle and then after a couple of mins bleeps and stops. Then when I open it there is an... [Read more]
Mend washing machine error code motor
3

How can I fix my Whirlpool washing machine?

my AWM6145/3 washer completes approx half its wash cycle, about 30 mins on daily wash and 15 mins on rapid, ha... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...