The program dial keeps revolving and the LED flashes 5 times. Which is error code 5, indicating trouble with the pressure switch.
I have taken the pressure switch out and tested it with a contituity tester and it seems to switch fine when there is a little pressure blown into the nozzle. I have also cleaned out the filter on the front of the machine. I then reset the maching by turning to the reset position and powering down for 5 mins. Sadly none of these things has corrected the problem.
I was hoping someone has experience of these machines and could tell me what to try next.
Do you have a picture of where to find the module ? I have taken the back panel off and I see the drum, motor, belt, etc. All the electronics seem to be up near the front panel.
Dren
November 2010
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
