Recent: Will I need to replace my garden tap?

Mend > Washing Machines

Mend Fisher & Paykel 011010000 Error Code Washing Machine Pump

Fisher Paykel error code 011010000 (104) hums and code lights - Won't turn ?

we were running the washer and it had popped the circuit. I reset the circuit and restarted the washer. It still had water in it so I tried advancing it to the rinse/spin cycle to drain it out and restart the load.
The pump would start and you could hear it pump water for about 2 seconds then it would stop pumping and then pump for 2 seconds again. This cycle happened about 5 or 6 times and then it would shut itself off.
I restarted and it went thru the same procedure about 4 more times. I was hoping that it just needed to "catch" and fix itself. That didn't happen.
I unplugged it and let it sit for 10 mins to try that.
Now when I plug it back in, I hear a buzzing noise and get the code 104 on the lights. I can't get it to go beyond that.
Any suggestions would be greatly appreciated.
Thanks,
Dennis

Dennis
June 2011
Code 104 is a communication error between the display PCB and the main controller PCB. It can be caused by a faulty display pcb, faulty main controller PCB, faulty drain pump or faulty RPS on motor. Rather than buy parts just in the hope of striking the right one, I suggest you call a service company who can come & test things properly & should have a spare PCB to use as a test one to isolate the problem. Much cheaper that way.

Lincoln Appliance NZ
June 2011
More info...
I forgot to add that it is a GWL10US
I drained the tub and removed the inside tub and used a sponge to get out all of the water. I leaned the washer over on its side and plugged it in. the hum is definitely coming from the pump motor. Someone once told me how to test the pump using a voltmeter but I forgot how.
Seems that the pump is probably kaput. However, would that cause the error when I plug in the washer? I don't want to order a pump and find out that it is something else.
Thanks again,
Dennis

Dennis
June 2011
More info...
I forgot to add that it is a GWL10US
I drained the tub and removed the inside tub and used a sponge to get out all of the water. I leaned the washer over on its side and plugged it in. the hum is definitely coming from the pump motor. Someone once told me how to test the pump using a voltmeter but I forgot how.
Seems that the pump is probably kaput. However, would that cause the error when I plug in the washer? I don't want to order a pump and find out that it is something else.
Thanks again,
Dennis

Dennis
June 2011
More info...
I forgot to add that it is a GWL10US
I drained the tub and removed the inside tub and used a sponge to get out all of the water. I leaned the washer over on its side and plugged it in. the hum is definitely coming from the pump motor. Someone once told me how to test the pump using a voltmeter but I forgot how.
Seems that the pump is probably kaput. However, would that cause the error when I plug in the washer? I don't want to order a pump and find out that it is something else.
Thanks again,
Dennis

Dennis
June 2011

Related Questions ...

Mend aquarius washing water
1

Hotpoint Aquarius WDF740 front loading washing Machine H20 Error?

Water enters machine but after about five seconds pressure switch closes input and after this occurs thrice H2... [Read more]
Mend error code drain pump washing machine
1

Error 37 despite repair man replacing parts?

Hi, I got an error 37, found a block (Piece of peg) in pump, which was removed. Same error code. Repair man r... [Read more]
Mend washing machine error code appliance
2

How can i fix my F&P Intuitive washing machine?

The pump in my washing machine continually pumps the water out through all cycles even when i push the off but... [Read more]
Mend washing machine error code blockage
7

indesit washing machine error code f05?

indesit washing machine with error code f05. checked filter and pump no blockage. can anyone help me please?... [Read more]
Mend error code drain pump washing machine
1

Bosch/Siemens washing machine error E:03 (WFXD5201UC/01)?

Purchased a second hand Siemens washing machine, front load , about two years ago. Recently had a hanger rip ... [Read more]
Mend blocked pump error 37 fisher paykel
1

Fisher Paykel Eco Washing Machine?

Will go through wash cycle fine, but can hear it is having a hard time draining. Once machine reaches the rin... [Read more]
Mend fisher paykel spin help machine
8

Fisher & Paykel GW601 spin problem?

Would greatly appreciate help with this washing machine. I replaced the rotor position sensor after machine s... [Read more]
Mend f05 hotpoint washing
1

F05 error code of Hotpoint wasing machine?

Hotpoint 960 washing machine has F05 fault again, managed to get it to do a spin to release water and then che... [Read more]
Mend washing machine error code pump
1

Logik L712WM11 E4 error code?

Washing machine Logik L712WM11 has an E4 error code it must be something to do with the pump but the O+Ms don... [Read more]
Mend load washing water
1

lg wm2487hwm front load washing machine?

the washing machine appears to not be pumping the water out, which then stops everything else, my wife says an... [Read more]
Mend error code washing machine pump
1

I have an error code e20 on my aeg washing machine?

I have been told this is the end of my machine but I disagree. It was filling and washing prior to a visit by ... [Read more]
Mend washing machine error code pump filter
2

How can I fix my Whirlpool AWOD 5726 F02 problem?

My Whirlpool AWOD 5726 washing machine had stopped working, displaying an F-02 code. I found out this was a dr... [Read more]
Mend blockage drain pump
2

Washing machine blockage?

I have a Zanussi zwf 1621w and when it is finished its wash we get 2 x beeps and some of the water isn't drain... [Read more]
Mend washing machine code
3

Samsung 5e Error - No debris in filter?

Hi, I have a Samsung washing machine (WF-B1456GW) and I'm getting the 5e error code. I have drained the ma... [Read more]
Mend fisher paykel washing machine
2

How can I fix my fisher and paykel washing machine?

My fisher and paykel smart drive excellence 7.5kg washing machine, model GW709AU, serial no. CSN522834 stopped... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...