My creda contour hob rings are dying. ?

you will probably find it is the switch and not the element.Type TYJ6219 Sunvic Simmerstat 200/250v only

Deni12
May 2011

There should be a sticker with the model number.

Open the oven door, and look on the panels on the front of the cooker. Try near the bottom.

Derek
January 2011

Okay, i found another question which says:

"I need to replace a faulty halogen ring on a Creda Contour Solarglo, but can't see how to remove the the ceramic hob.
- you have to remove the end caps from the cotrol panel ,the control panel glass,& the two side panels of the cooker to get to the screws securing the hob,there will be two or three screws at the back of the hob, then the whole unit will lift clear
some have a plug and socket to disconnect the whole thing.
then turn it upside down to remove the faulty ring"

So it sounds do-able...

HOWEVER i now need to work out what model number a creda contour solarglo is so i can find out if anyone sells the halogen rings (fast ring and standard ring have died). Any clues how to identify the parts I need to get much appreciated as it looks like a couple of hundred quids worth of parts so I want to get this right!

Jo

Jo Coffey
January 2010