Recent: Home max fs506x?

Mend > Home Alarm Systems

Mend Honeywell Accenta System Door Exit

setting fault?

i have just installed a accenta system i have a pir and a door contact in my exit route both are set as timed zones when setting the system both zones say setting fault as i leave is this normal ?

phil
December 2009
Firstly why install an Accenta, its an alarm panel aimed at the diy/lower end of the market. Poor choice.
Yes Phil very normal, providing the door is open at the time,
Regards
Nick

Nick
December 2009

Automatic Answer

We may have found other answers which could help you.

Click here for System Door Exit

Related Questions ...

Mend alarm doors instructions
1

Scantronic 9600 Exit doors ?

Hi We bought a house with a Scantronic 9600 alarm already fitted and we had the instructions to change the co... [Read more]
Mend security system door
1

How to put a door chime on my alarm system?

I have a Optima Compact 8EP396A Alarm. Can not find the manual how to put the chime on the exit doors. I use... [Read more]
Mend works set switch
1

The door chime works, but will not set off the alarm when the door is opene?

I have changed the door reed switch on the entry exit door,when the door is opened it sets off the chimes but ... [Read more]
Mend scantronic alarm system fault
2

Scantronic 9800 - c1 alternating t1 (Temper Fault)?

I am a homeowner. I need help to reset c1 T1 fault on my alarm system. I have a SCANTRONIC 9800 ALARM SYSTE... [Read more]
Mend alarm system control panel tamper fault
17

9751 alarm with tamper fault?

Folks, I have inheritted an alarm system with the purchase of a new house. It's a Watson Alarm system but i... [Read more]
Mend home light keypad
5

Veritas 8 >Unset light flashing constantly?

The unset light flashes constantly & I cannot arm the system.Is this likely to be a battery problem? I've see... [Read more]
Mend alarm longer set
2

How can I fix my Melcom ST6500 alarm system?

I can no longer set my Melcom ST6500 alarm. I put in the code and the exit beep begins but when I close the fr... [Read more]
Mend alarm help intruder
10

My home alarm system is behaving strange can anyone help?

I have a Scantronic 9450 Home intruder alarm system which does not set off the external and internal sounders ... [Read more]
Mend alarm problem system set
2

Scantronic 9651 Alarm problem - System does not set?

I have a Scantronic 9651 alarm fitted with 9930 keypad. I set the alarm but when I press A (Arm button) and ex... [Read more]
Mend front door alarm
4

How do I change my front door to be the same delayed exit time as back door?

How can I change my front door to have the same exit delay as my back door on my alarm system Gardec 360/580
Mend security system fault
2

ACCENTA 8 - Door entry problem?

Hi, Our Accenta8 system has just started doing an odd thing. All aspects of the system work fine accept one ... [Read more]
Mend security sensors system
2

9448+ "style" Scantronic alarm system?

A bit of advice needed really? We are currently doing some decorating at home. I started trimming the edges... [Read more]
Mend accenta system set
1

can i add a PIR detector to my accenta 8 mini alarm system?

Hi there, i have an accenta 8 mini alarm system installed, and i have just figured out how to set it etc. howe... [Read more]
Mend system work working
2

Accenta G3. Home alarm system?

The entry/exit door sensors work sometimes and not others. When they stop working, I lightly rub one of them a... [Read more]
Mend scantronic 9800 battery
2

How to reprogramme a Scantronic 9800?

I recently paid a technician to replace the battery in my alarmand he managed to lock out the keypad. I was no... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Alarm Systems ...

Related Categories

Mend Car Alarm Systems
Car Alarm Systems