Recent: Safely remove screen protector from a Macbook Air?

Mend > D.I.Y Tools

Mend Craftsman 12-inch band saw Drive Motor Wheel

BELT COMING OFF TRACK?

The drive belt from the motor on my 12-inch Craftsman band saw came off the lower wheel, and I can't get it to stay, even as I manually turn the wheel.I assume one of the mounts (lower wheel, or motor) must be out of whack. I have used it for years,and fixed other problems. Can someone point me in the right direction?

Bob
October 2009

Automatic Answer

While you wait for answers, we may have found some information which could help you.

Click here for Drive Motor Wheel

Related Questions ...

Mend sewing machine second
1

How can I tighten the drive belt(s) on my Frosted /Rossman64 sewing machine?

I acquired a second hand F/R 64, model no' 507, serial no' 5009293. An electrician friend helped oil, grease a... [Read more]
Mend frister rossman top
1

Frister and Rossman Cub 3 whirring but not moving?

The motor whizzes, but nothing moves. Looking down from the top I can see that teeth are missing on the large ... [Read more]
Mend sewing machine motor stitch
1

How can I get my machine to work? - the motor runs but does not drive machi?

How can I get my machine to work? - the motor runs but does not drive machine, I retightend the stop motion kn... [Read more]
Mend frister rossmann machine
3

How can I fix my Frister Rossmann Sewing Machine?

The motor and hand wheel are turning OK but the Take up Lever is fixed and does not move up and down. The prob... [Read more]
Mend problem singer machine
1

small motor problem on singer type machine?

I have a novum sewing machine (Mark III) - the type with a motor to balance wheel, rubber belt drive. Just lik... [Read more]
Mend tumble dryer drive belt zanussi
1

Zanussi TC7114W tumble dryer drive belt configuration?

The drive belt has snapped on my Zanussi TC 7114 W condenser tumble dryer, I have bought a new one but as the ... [Read more]
Mend replace tumble condensing
1

how to replace a motor jockey pully on a tumble dryer?

I have a zanussi TC7103W condensing dryer, there is a knocking and burning smell when the drum turns. I have t... [Read more]
Mend engine lawn mower
2

Mower cranks when primed, but after running a second or two dies?

I have a sears craftsman II model # 917 372 480 5.0hp, with the the 22" cut, front wheel drive model. Ok, her... [Read more]
Mend tumble dryer drive belt drum
2

Drive-belt tightening on Zanussi TC470?

There are several threads on this forum with respect to this problem (going back to 2004) Here's a list: h... [Read more]
Mend washing machine motor drum
1

problem with washing machine ,spin?

my washing maching will not spin ,the drum is just rocking back and forward when its ment to be spinning,i che... [Read more]
Mend belt motor wheel
1

How is the drive belt on Hoover D6060 tensioned?

How does the drive belt pass around the motor and the tension wheel?
Mend jeep grand cherokee
1

How can I replace a idle control motor for 1997 Jeep Grand Cherokee Ltd. 8?

How can I replace an idle control motor for a 1997 Jeep Grand Cherokee Ltd. 8 cyl. 2 wheel drive?
Mend problem motor working
1

How do I fix drive problem on Frister Rossmann 110?

I cannot get a proper "drive" between the motor (which is working fine) and the shaft and the belt is adequate... [Read more]
Mend system great turn
1

how do i bleed a hydraulic system on great dane ride on mower?

hi i have a great dane chariot zero turn hydro drive mower, and I split a hose on drive wheel motor. I have fi... [Read more]
Mend belt machine washer
1

drive belt keeps slipping off my washing machine?

why does the drive belt keep slipping off my Hoover washer dryer,wd120? i have changed the belt but its still... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend D.I.Y Tools ...