when i put the alam on it wont stop unles i pull out the fues out the problem now when i put the fues backin the alam gos off it only stops when i pull it out thank you
they have probably cut a wire somewhere so tamper is in operation, try shorting out your tamper terminals and also short out the PA terminals put power back on and see if system will now work, you may have an alarm condition on the "faulty circuit" if they have cut a wire but at least you know where to start looking for your problem then.
dave c
August 2009
if its veritas maybe try 4321 if it could of gone back to factory settings try that
death
August 2009
sounds like the panel battery is shot and the builders have managed to change the code by mastake.