Cut cable, replaced cable -> still nothing?

I have the same problem. I cut the cable by mistake, since the cut was near the plug, I removed the plug and fixed the plug where I had cut the wire. Now the hedge trimmer does not start up. Initially I thought it was a loose connection, but I have checked and rechecked and whatever I do I cannot get the trimmer to work. I don't know if it is jammed and I don't know how to check.
Can I know where the fuse is located, mine is a Black and Decker GT25.

Mike
May 2009

Update:

Altho the fuse looked fine, just to check I swapped it with the strimmer, and low and behold ... the fuse was blown!

At least it's fixed now!

Dan Lonsdale
May 2009