The electrical schematic is hidden inside the control panel. The control panel where the knobs are mounted is attached by four screws at the top, and by clips on the top surface. Remove the top surface of the dryer by pressing (slip a thin screwdriver into the crack and push back - no prying needed) the hidden clips at the front left and right corners where the top panel and front panel meet. Then remove the four screws on the panel. The schematics are folded into a slot inside.
bryan
September 2007
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix tumble dryers.