Recent: Home max fs506x?

Mend > Washing Machines

Mend Hotpoint WD420 Cycle Element

HOTPOINT WD420.TRIPPING MAIN FUSE ON A WASH CYCLE?

would a heavily lime scaled element trip the main fuse

GSS
November 2008
this machine switches on neutral so there is a live feed to all components as soon as its turned on. most common problem is dryer heating element

The Doctor
November 2008
Yes,- but don't rule out that the element may have corroded sufficiently to develop a pin prick hole which has allowed water into the chalk filling in the element.
This would trip the main fuse as soon as the washer went onto the water heating cycle

cledlyn
November 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Hotpoint Cycle Element

Related Questions ...

Mend hotpoint water washes
1

Hotpoint WMD960 Ultima Not Heating the Water?

For the last few washes my Hotpoint WMD960 Ultima does not appear to be heating the water. The clothes come ou... [Read more]
Mend hotpoint start flashing
1

Hotpoint WD440, told it was a heating element?

start (K) cycle but wont finish. lights start flashing, found loose wire on element and replaced work`d for li... [Read more]
Mend washing machine heating element Hotpoint
1

Hotpoint wf860 doesn't finish a wash cycle, ?

My hotpoint wf860 doesn't finish a wash cycle, have been told its a faulty heating element, is this right
Mend washing machine pcb drain
1

Hotpoint WF321 pumping all the time?

HELP!!!! - I have a hotpoint WF321 washer, and it is stuck on the pump cycle all the time - it will do a spin ... [Read more]
Mend heating element washer wonder
2

HOW CAN I LOCATE THE HEATING ELEMENT IN MY WASHER?

davy mac thank you for your reply. i wonder if you could help me further.i agree it sounds like the heating el... [Read more]
Mend dryer spin cycle
2

knocking on hotpoint aquarius wd440!!?

My washer dryer has been knocking very loudly when on the spin cycle for as long as I have had it (about 2 1/2... [Read more]
Mend stops filling press
3

Hotpoint thermostat question?

My Hotpoint 9536 stops after filling, I believe it`s the thermostat as the element and thermal overload are o... [Read more]
Mend washing machine drum fault code
1

HOTPOINT WD860 BURNT HOLES IN CLOTHES?

when washing cycle ended (not using dryer) i noticed holes burnt into my clothes and pieces of what looked lik... [Read more]
Mend move rinse spin
2

never ending wash cycle on hotpoint WD440?

I have a 2 year old Hotpoint WD440 which stays in the wash cycle and does not move to rinse and spin. I think... [Read more]
Mend hotpoint washing washer
4

Circuit diagram required for hotpoint wm22 1000 washing machine?

Hi, I have the above washer Aquarius 1000 de luxe WM22 and I must say it's excellent. Changed the tub bearings... [Read more]
Mend machine dryer heater no heat
3

Hotpoint WD440 no load on the heater element?

Hello We have a one year old Hotpoint WD440 and the dry cycle isn't heating up. I posted a question saying a... [Read more]
Mend hotpoint dryer couple
1

wd420 hotpoint aquirius washer dryer fast spinning whilst drying?

I have a hotpoint wd420 washer dryer with a couple of problems. Firtsly the fast spin cycle seems to be workin... [Read more]
Mend washing machine heater element motor
4

Hotpoint WD61 Stops part way through program?

Getting fed-up; I've tried all my usual standbys, but I cant find the problem. The machine was stopping part w... [Read more]
Mend washing machine heating element repair
1

where is the heating element on hotpoint 9536?!?

Hotpoint 9536 cycle will not complete. Needs a tweak of control wheel to make it continue. Suspect its waiting... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...