Mend Hotpoint WD440 Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Mend repair fix Hotpoint WD440 washing machines

Mend washing machines ...

Mend Washing Machines

Mend > Washing Machines

Mend Hotpoint WD440 Element Hello Cycle Heating

Hotpoint WD440 no load on the heater element?

Hello
We have a one year old Hotpoint WD440 and the dry cycle isn't heating up. I posted a question saying as much and it was suggested I test the element and the load during the dry cycle.
I checked the element and there is continuity.
I carefully taped a voltmeter to the spade connectors and I am getting no load during the dry cycle. Occasionally I see 5, 15 and once 44 volts register but only for a second. One thing I did notice is the element has a sensor of some sort connected by a 2 pin plug. Without this connected the washer goes into mode which can only be terminated by unplugging the mains.
Any suggestions?

Robert Moss
November 2006

Hotpoint WD440 Household Appliances, Washing Machines Hotpoint Element Hello Cycle Heating

Hello
It was the cut out that had failed. It is a once only so I need to replace it. The reason it had failed was the fan had come loose so no air was circulating.

Robert Moss
December 2006

Thanks Phil
I'll have a look and see if there is a cutout.

Robert Moss
November 2006

robert on the top of the element housing ther are some cut outs some of them have a push button on top to reset them try pushing them quite hard

phil grimshaw
November 2006