Mend > Cassette Recorders

Mend Mitsubishi HS-B52 Tape Mechanism Motor

Mitsubishi HS-B52 mechanism?

I seem to have a problem with this fantastic VCR. I dont know much about the mechanisms here but when I push in the tape, the tape goes in fine but doesnt play. The motor seems to be turning but the belt that connects the motor to the gears dont seem to move much. The tape doesnt wrap around the drum either. Then after a while the power fades on the display.

Please can you assist ? I can take photo's if necessary - I dont really want to part with this superb machine

Thanks

John
October 2005

Mitsubishi Mitsubishi HS-B52 Video, Cassette Recorders Tape Mechanism Motor

Most common problem I've come across with these is the brake arm to the right side of the take-up reel table. I think this may well cause the symptoms you described.

There's a thin lever with a tiny felt brake pad at it's end (look to right side of mech viewed from the front).
It nearly always peels off or falls off completely causing the lever stick or jam.

It's unlikely you'll be able to get a replacement anymore, so look for a tiny black pad in the mechanism and reattach with the smallest amount of super glue gel to ensure no glue leaks through the pad.

Generally on an older machine, belts will be slack and break pads worn.

Other problems, check where capstan belt attaches to capstan flywheel, sometimes the press on pulley wheel splits and either causes belt slippage or pulley falls off completely.

Cobweb
October 2005