Recent: Safely remove screen protector from a Macbook Air?

Mend > Washing Machines

Mend Indesit WI101 W Water Switch Changed

Cold water overfilling?

When water is coming in it gets to level but keeps filling. When I switch off at switch the water stops coming in. I have changed the pressure switch but to no avail.
Its a indesit Wi101 W/machine.
Any Ideas Please

Colonel
January 2008
Tried the pipe and can blow air down it without a problem,
Many thanks for reply.
Col

ken
January 2008
Often it is the pipe leading to the pressure switch that is clogged.

Colin
January 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Water Switch Changed

Related Questions ...

Mend washing machine bosch drain pump
1

Cause of Ready light flashing on a WFG2420 washing machine?

Hello,please help with a Bosch WFG2420GB washing machine fault diagnosis. The 'Ready' light started flashing... [Read more]
Mend filled water stopped
1

hotpiont super silent wf860?

just filled with water 3/4 of drum, then stopped and came up with h20 on display, and stopped, changed pressur... [Read more]
Mend trip checked water
1

what is making my hotpoint wd62 blow the trip switch?

i have checked there is no water leaks anywhere and every time i plug it in it trips the mains electric. The t... [Read more]
Mend washing machine repair pressure switch
2

indesit 1200 WIDL 1265?

re above, red led door light flashing rapidly, green easy iron led light flashing steady, when first turned on... [Read more]
Mend keeps trip switch
2

Beko keeps blowing the trip switch?

My beko WM has started blowing the trip switch at the main board. I checked and changed fuses to no avail, and... [Read more]
Mend washing machine water pump repair
1

how can i fix my WE12 indesit washing machine?

I have an indesit WE12 and the water isn't draining. I have changed the water pump and cleaned gunk out of con... [Read more]
Mend machine replaced bearings
1

How can I fix my Hotpoint WMA62S?? -Help Me-?

I recently have been having a few problems with my Hotpoint machine. I have replaced the module, bearings and ... [Read more]
Mend hotpoint washing washer
4

Circuit diagram required for hotpoint wm22 1000 washing machine?

Hi, I have the above washer Aquarius 1000 de luxe WM22 and I must say it's excellent. Changed the tub bearings... [Read more]
Mend washing machine hotpoint inlet valve
1

wma 76 no water?

hi can anyone help my hotpoint wma76 digital wont take in water i have changed the pressure switch also inlet ... [Read more]
Mend washing machine inlet valve water
2

no water?

hi i have a hotpoint ultima 1400 machine it goes through the cycles but i have no water, i changed the inlet v... [Read more]
Mend pressure level machine
1

Hotpoint WMA30, faulty pressure / level switch?

Hi, I have recently changed the bearings in my Hotpoint WMA30 washing machine and now have a new problem! The ... [Read more]
Mend washing machine control board drum
1

Zanussi fj1295 drum not spinning?

If a program is started, machine takes in water OK but when a spin cycle is needed the drum starts to run up t... [Read more]
Mend stopped wash cycle
2

Candy Aquaviva 1000 Automatic Washing Machine?

The machine stopped soon after the start of a wash cycle after filling with water and revolving a few times. ... [Read more]
Mend washing machine error code drainage
3

WM72N Error code E15?

Help! I've got the error code E15 on my Hotpoint. I've checked the outlet pipe, cleaned the filter and de-silt... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Washing Machines ...