Recent: Safely remove screen protector from a Macbook Air?

Mend > Vacuum Cleaners

Mend Panasonic MC-E3001 Vacuum Cleaner

How can i fix my Panasonic vacuum Cleaner 1700w lightweight MC-E3001?

I have a Panasonic 1700 lightweight MCE3001 cleaner
It keeps cutting out when in use sometimes after a minute sometimes after five. If i leave it a while it will restart-Could it be over heating? and if so what to do
Thanks
Lisa

Lisa Geen
January 2008
The brushes are not rotating and I am not sure about the presence of a belt - cannot see one from underneath - but totally no expert !

Sammy C
June 2014
How do I fit the drive belt turning the brushes
on my Panasonic 1700w carpet cleaner.

Stewart Davis
March 2012
the small belt keeps breaking

graham l
March 2011
I have the same problem - did you have any joy fixing?

Steve Copeland
November 2008
I don't have an answer yet, but I have the same problem. I am presuming it is a fault with the thermal cut-out unit. Perhaps the contacts. I'll have to find out.

Kevin Elliott
July 2008

Related Questions ...

Mend vacuum cleaner motor
1

Accessing the motor?

Can you tell me how to access the motor on a Panasonoc MC-E3001 vacuum cleaner?. I removed the obvious screws ... [Read more]
Mend vacuum cleaner panasonic
2

Dust is blowing out of my vacuum cleaner?

I have a Panasonic mc-e8023 and lately it has started blowing all the hoovered dust out of the back of the uni... [Read more]
Mend vacuum cleaner panasonic
2

No suction?

Panasonic MC-E3001 upright vacuum cleaner will not suck up - checked and can find no blockages, filters have b... [Read more]
Mend belt brush roller
1

how can i replace the rubber belt on panasonic mc-e455 vacuum cleaner?

how do i replace the rubber belt that drives the brush roller on panasonic mc-e455 vac cleaner?
Mend vacuum cutting out
1

Vacuum Cutting out?

have a Panasonic 1700 lightweight MCE3001 cleaner It keeps cutting out when in use sometimes after a minute s... [Read more]
Mend belt cover cleaner
1

How to fit a belt to a Panasonic MCUL 862?

I have the cover off the vacuum cleaner but there are 2 metal spindles does the belt go over just the closest ... [Read more]
Mend vacuum cleaner upright Panasonic
1

How do i get to the power lead connection?

I have a panasonic MC-E458K upright Vacuum cleaner. How do I remove the panel in order to get to the power ... [Read more]
Mend How to mend it?
1

Panasonic MC-E3001 Vacuum Cleaner?

Cleaner cuts out after 5/6 minutes - resets after 10/20 minutes. Filters appear to be OK & no blockage in hose... [Read more]
Mend vacuum canister good
3

Panasonic MC-E8023 vacuum cleaner - keeps stalling?

Hi We have a Panasonic canister vacuum, about 2yrs old. Works fine and has good suction, so long as I clean... [Read more]
Mend How to mend it?
6

PANASONIS JET-FLO 240 VACUUM CLEANER NOT WORKING,where to buy spare parts?

where can i find belt for panasonic jet-flo 240 vacuum cleaner?also c-3 type vacuum bag?(brush in the intake ... [Read more]
Mend cleaner e 458
1

How can I fix vacuum cleaner panasonic E 458?

It is broken at concertina vacuum tube support bracket. Needs whole new casing.
Mend vacuum cleaner bagless
1

very little suction?

panasonic upright vacuum cleaner, bagless. mc-e471. very little suction.
Mend vacuum cleaner power cord repair
1

how do i replace the power cord on a panasonic mce468 vacuum cleaner?

How do I access the inside of the panasonic mce468 vacuum cleaner to replace the power cord?

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Vacuum Cleaners ...