How to mend ... Worked Replaced Machine

zanussi1265stuck in 2second spin mode?

zanussi wjs1265w washer/dryer stuck in spin mode? zanussi wjs1265w washer/dryer stuck in spin mode? how can ... [Read more]

Pro-Form 500 TL runs 25 mins then stops cold?

My Pro-Form 500 TL runs 25 mins then stops cold. I replaced the tread about a month ago. I have been using i... [Read more]

How can I fix my proline TDC6A tumble drier?

My machine tumbles but no heat. Recently replaced thermostat x 2 using kit and it worked for 3 months. Stopped... [Read more]

How can I fix my Zanussi Washer Dryer WJD1257W?

I have replaced the door catch with a new one but whilst all the correct lights come on nothing happens and th... [Read more]

Handwheel disengages, revisited?

Singer 427 Following the excellent advice on this site, I removed the handwheel, changed the position of th... [Read more]

PRESSURE WASHER 100 BAR?

i USE MY PESSURE WASHER ONCE A YEAR, GOT OUT TO DO THE FLOOR, WORKED AS USUAL THEN STOPPED, IS THERE A FUSE IN... [Read more]

AEg OKO_lavamat stopped working after ceaning the filter / pump?

The washing machine stopped working before spinning, i gathered that it must be the pump since it worked if i ... [Read more]

Kenmore Ultra Wash series 600 or 700 with dribbling water inlet?

I have a Kenmore Ultra Wash dishwasher (series model 600 or 700 - not sure) that came with my home. It was pur... [Read more]

Why does thread break on lower looper?

I have a new Kenmore serger (Model #16622). After using it for an hour or so, the left needle bent. (I was se... [Read more]

HOTPOINT 1000 First Edition does not rinse and spin properly?

I had a problem where the belt had gone on this machine so replaced it. It worked for a while (about 3 days... [Read more]

Hotpoint TDC32 DEAD?

I replaced the motor in my tdc32p put the machine back together at 3am! fired it up and it all worked well exc... [Read more]

Hotpoint Mistral plus 8596p,The freezer was cold but the fridge was warm 22?

The freezer was cold but the fridge was warm 22c I defrosted and replaced the evap thermo,It worked for a whil... [Read more]

My Sewing machine won't catch the bobbin thread after a few stiches. HELP!?

I have a Kenmore Sewing Machine model number 385.15358. This morning I replaced the needle since it has been a... [Read more]

door locked light flashing,machine wont start hotpoint aquarius WM31A?

Do I need to replace the door lock mecchanism? It has been doing this for a while, but previously if you open... [Read more]

Wobbly and creaky floors?

We live in a 1986 “Mclean” built semi-detached home with excessive floor noise. The upper floor has two p... [Read more]

My cordless phone no longer communicates with the base?

Hi! I have a Uniden TRU348 cordless phone. It worked perfectly for a couple years then one day I could no long... [Read more]

Kenmore HE3 Elite problem?

I have a Kenmore HE3 Elite washer that will not go into the final spin/rinse cycle. I was told it was a faulty... [Read more]

Epson C44 fault?

My Epson worked perfectly until I replaced the Colour Cartridge (with a Think Compatible) and the machine froz... [Read more]

Hoover6 express (AM120) trips fuse board on full spin?

engineer called thought it were brushes on motor although they were only half worn, cleaned them and the armat... [Read more]

creda 37747 tumble dryer thermal cut out switches help?

There are 4 wires of different colours and there are 2 cut out switches one is marked with a red dot and has t... [Read more]