How to mend ... Tank Valve Allows

Worcester Bosch Heatslave 15/19, No water pressure?

I realise that mains water is needed to increase pressure, but I can't see any valves or connections where i ... [Read more]

Adding a thermostat valve to a radiator?

I want to fit a valve to a radiator which is on top floor. The system is pressurised to 2 bar with an expansio... [Read more]

fuel leak in carburetor?

I have an old suffolk punch 35s with a dellorto carb When I release the fuel valve on the tank, as soon as ... [Read more]

How do I get an air lock out of my heating system?

I've just drained my system to fit a new radiator. Water has stopped coming out of the drain valve but the hea... [Read more]

tank of hot water but no central heating?

the hot water switch starts everything working and heats a tank of water, plus one radiator! however, the cent... [Read more]

where to find a replacement gasket seal for the waste holding tank?

I need a replacement gasket for the waste holding tank under the holding tank valve! It's on a Pak-A-Potti IV... [Read more]

riello 40 gxb burner ??

i have the above burner on a fire bird combi -about 8 years old ,the system ran out of oil and sucked cr*p in ... [Read more]

boiler fault?

boiler pressure keeps dropping .have changed pressure switch and p.r.v valve. exspansion tank seems ok . cant ... [Read more]

how can i fix my juddering?

hi, my 1.8 zafira will judder now and again sometimes worse than others, have had it at the garage, nothing sh... [Read more]

transit t260?

water in fuel- drained tank- refilled with clean diesel-drained fuel filter-primed system by bleeding by injec... [Read more]

Mr MPuk...Lousy Transit!!!!?

I have a 51 reg 2L td transit, it keeps breaking down. I have replaced the fuel filter housing and filter as s... [Read more]

Briggs & Stratton 6.75 EZ-start mower - trouble starting?

Mower won't start without several minutes of attempts. Had taken the thing apart to find that a mouse had cra... [Read more]

6.5 briggs and stratton intek dies?

i have a b&s 6.5 intek horizontal shaft on a go cart. it starts easily and idles fine, but when i step on the... [Read more]

mondeo overheating and excesive reving?

I have a ford mondeo 1.8 r reg which has been converted to gas before i got it. it overheats when idling but t... [Read more]

Cold water header tank overflowing?

I noticed recently that I have a float valve in my coldwater header tank that is not completely shutting off ... [Read more]

how can i stop my indirect combination cylinder overflowing BS3198:1981?

Hi there, Help needed to fix overflow problem I have a McDonald Engineers Hot Water System. Spec: Indirect ... [Read more]

where is my diverter valve?

i moved into new house with potterton flamingo 50, can not just run water heating can only get water heating a... [Read more]

Potterton Puma 80 Expansion Vessel?

Is the expansion vessel the little round ball with the car type valve on the top, or is it the big orange tank... [Read more]

How can I fix my Briggs & Stratton rototiller carbuerator?

I have a Troy rototiller with a B & S 6 horsepower overhead valve engine that is not drawing fuel from the tan... [Read more]

Cold water tank in the loft overflows during the night?

My cold water tank in loft overflows during the night despite having had a new ball valve fitted. During the ... [Read more]