How to mend ... Reset Years Ago

Eurosec PR5208 Mains Flt after drilling through cable?

Hi Guys I have a Eurosec alarm in my apartment with a PR5208 control panel. About eight years ago when I move... [Read more]

How to fix Stannah 300 chair lift?

I have a Stannah 300 chair lift, which was in good working order 4 years ago. It was not used since then. I tr... [Read more]

Why has Heat Exchanger on IDEAL ISAR HE24 gone?

So... At the end of 2008 (early December, so about 4.5 years ago). We had central heating installed for the... [Read more]

Lock out in Ideal mini combi gas boiler?

The boiler has not worked to its full potential for months e.g take ages to get hot water for bath and called ... [Read more]

Scantronic 9800 problem - how can I get it to work?

A Scantronic 9800 was fitted to my house many years ago and the very elderly previous owner lost the codes and... [Read more]

My Glow Worm Micron 30FF wont light. How can I check whats wrong&fix it?

I have a Glow worm Micron 30FF which was installed new 4 years ago. Since then it has been serviced and a new... [Read more]

how disable/ turn off cobra gold line alarm?

Alarm was installed post purchase of vehicle in 1992. The alarm had been disabled using the under bonnet key ... [Read more]

Main oven comes on when cooker switched on?

I need to dismantle control panel to reset main oven switch thermostat which is malfunctioning -main oven is c... [Read more]

How to reset alarm bell to louder setting on 930 Deplomat?

I have tried to use the small timer which you can use to time things in the cooker for anything from 1 minute ... [Read more]

How do I reset airbag warning light on peugeot 107 and 407?

Recently, I went away for a week and unbeknown to me I left an interior light on. This drained the battery an... [Read more]

gardtec 300 power supply?

Had this alarm for about 15 years only problem ever was to replace back up battery.We had a power cut for 16ho... [Read more]

Galax8 8 Reset After Setting Off Alarm?

Hi all. i have an ADT alarm with a Galaxy 8 keypad, this alarmed was monitored by ADT for 5 years, but, due t... [Read more]

Humax slow pulling in programme guide?

My first 9200T was replaced (some 2-3 years ago) by John Lewis because the unit could not pull in the programm... [Read more]

Kenmore Elite Dishwasher Model 665.15979992 No Heat Dry Light On?

The dishwasher will not work. Have tried all of the alternatives listed in this thread. Here's what the dish... [Read more]

Heat Surge Trips reset button?

My heat Surge is about 3 years old, and about a week ago it tripped the reset button. I reset it and it blew a... [Read more]

my mains 24e baxi potteron make will not light up?

i have mains 24e gas boiler 2 weeks ago i found that hot was not as hot as normally it gives .i called the en... [Read more]

Worcester Oil Boiler Burner Lockout?

Hi. The Worcester Boiler is 6 years old and was last serviced 2 months ago. It goes to "Lockout" when restarti... [Read more]

No water from hot taps with Vaillant ecoTEC plus 831?

System was installed 3 years ago and has worked well. Last few days we have been running in 24/7 and have low... [Read more]

How can I fix my Potterton 80e bolier that keeps tripping the reset button?

In this cold weather the boiler operates fine up to a point and the reset button is triggered. Meaning when it... [Read more]

Worcester Greenstar 24i junior: doesn't work!?

Hi I've just moved into a new property, the boiler is only about 2 years old; when I moved into this house th... [Read more]